verbose: Displays detailed information about all routes, including both active and inactive routes. Without this keyword, the command displays only brief information about active routes.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Usage guidelines

The display ip routing-table command displays brief information about a routing table, with a routing entry contained in one line. The information displayed includes destination IP address/mask length, protocol, priority, cost, next hop and output interface. The display ip routing-table command displays only the optimal routes in use.

The display ip routing-table verbose command displays detailed information about all active and inactive routes, including the statistics of the entire routing table and information for each route.

Examples

# Display brief information about active routes in the routing table.

<Sysname> display ip routing-table

Routing Tables: Public

Destinations : 7 Routes : 7

Destination/Mask Proto Pre Cost NextHop Interface

1.1.2.0/24 Direct 0 0 1.1.2.1 Vlan1

1.1.2.1/32 Direct 0 0 127.0.0.1 InLoop0

2.2.2.0/24 OSPF 10 2 1.1.2.2 InLoop0

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

192.168.0.0/24 Direct 0 0 192.168.0.1 VT1

192.168.0.1/32 Direct 0 0 127.0.0.1 InLoop0

Table 1 Command output

Field	Description
Destinations	Number of destination addresses.
Routes	Number of routes.
Destination/Mask	Destination address/mask length.
Proto	Protocol that installed the route.
Pre	Preference of the route.
Cost	Cost of the route.
NextHop	Next hop address of the route.
Interface	Output interface for packets to be forwarded along the route.

# Display detailed information about all routes in the routing table.

<Sysname> display ip routing-table verbose

Routing Tables: Public

Destinations : 6 Routes : 6

Destination: 1.1.2.0/24

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

IpPrecedence: QosLcId:

NextHop: 1.1.2.1 Interface: Vlan-interface1

BkNextHop: 0.0.0.0 BkInterface:

RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0

Tunnel ID: 0x0 Label: NULL

BKTunnel ID: 0x0 BKLabel: NULL

State: Active Adv Age: 06h46m22s

Tag: 0

Destination: 1.1.2.1/32

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

IpPrecedence: QosLcId:

NextHop: 127.0.0.1 Interface: InLoopBack0

BkNextHop: 0.0.0.0 BkInterface:

RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0

Tunnel ID: 0x0 Label: NULL

BKTunnel ID: 0x0 BKLabel: NULL

State: Active NoAdv Age: 06h46m22s

Tag: 0

Destination: 127.0.0.0/8

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

IpPrecedence: QosLcId:

NextHop: 127.0.0.1 Interface: InLoopBack0

BkNextHop: 0.0.0.0 BkInterface:

RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0

Tunnel ID: 0x0 Label: NULL

BKTunnel ID: 0x0 BKLabel: NULL

State: Active NoAdv Age: 06h46m36s

Tag: 0

Destination: 127.0.0.1/32

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

IpPrecedence: QosLcId:

NextHop: 127.0.0.1 Interface: InLoopBack0

BkNextHop: 0.0.0.0 BkInterface:

RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0

Tunnel ID: 0x0 Label: NULL

BKTunnel ID: 0x0 BKLabel: NULL

State: Active NoAdv Age: 06h46m37s

Tag: 0

Destination: 192.168.0.0/24

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

IpPrecedence: QosLcId:

NextHop: 192.168.0.1 Interface: Virtual-Template1

BkNextHop: 0.0.0.0 BkInterface:

RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0

Tunnel ID: 0x0 Label: NULL

BKTunnel ID: 0x0 BKLabel: NULL

State: Active Adv Age: 06h46m35s

Tag: 0

Destination: 192.168.0.1/32

Protocol: Direct Process ID: 0

Preference: 0 Cost: 0

IpPrecedence: QosLcId:

NextHop: 127.0.0.1 Interface: InLoopBack0

BkNextHop: 0.0.0.0 BkInterface:

RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0

Tunnel ID: 0x0 Label: NULL

BKTunnel ID: 0x0 BKLabel: NULL

State: Active NoAdv Age: 06h46m35s

Tag: 0

Statistics for the entire routing table are displayed first, followed by detailed description of each route (in sequence).

Table 2 Command output

Field	Description
Destination	Destination address/mask length.
Protocol	Protocol that installed the route.
Preference	Preference of the route.
Cost	Cost of the route.
IpPrecedence	IP precedence.
QosLcId	Local QoS ID.
NextHop	Next hop address of the route.
Interface	Output interface for packets to be forwarded along the route.
BkNextHop	Backup next hop.
BkInterface	Backup output interface.
RelyNextHop	Next hop address obtained through routing recursion.
Neighbor	Neighboring address determined by the routing protocol.
BKTunnel ID	Backup tunnel ID.
BKLabel	Backup label.
State	Route status: · Active—This is an active unicast route. · Adv—This route can be advertised. · Delete—This route is deleted. · Gateway—This is an indirect route. · Holddown—Number of holddown routes. Holddown is a route advertisement policy used in some routing protocols, such as RIP, to avoid the propagation of incorrect routes. It distributes a Holddown route during a period regardless of whether a new route to the same destination is found. For more information, refer to relevant routing protocols. · Int—The route was discovered by an Interior Gateway Protocol (IGP). · NoAdv—The route is not advertised when the router advertises routes based on policies. · NotInstall—The route with the highest priority among the routes to a destination is installed into the core routing table and advertised. A NotInstall route cannot be installed into the core routing table but can be advertised. · Reject—The packets matching a Reject route are dropped. The router sends ICMP unreachable messages to the sources of the dropped packets. The Reject routes are typically used for network testing. · Static—A static route is not lost when you perform the save operation and then restart the router. Routes configured manually are marked as static. · Unicast—Unicast routes. · Inactive—Inactive routes. · Invalid—Invalid routes. · WaitQ—The route is the WaitQ during route recursion. · TunE—Tunnel. · GotQ—The route is in the GotQ during route recursion.
Age	Time for which the route has been in the routing table, in the sequence of hour, minute, and second from left to right.
Tag	Route tag.

display ip routing-table ip-address

Use display ip routing-table ip-address to display information about routes to a specific destination address.

Use display ip routing-table ip-address1 { mask-length | mask } ip-address2 { mask-length | mask } to display information about active routes whose destinations and masks fall into the specified address range.

Syntax

display ip routing-table ip-address [ mask | mask-length ] [ longer-match ] [ verbose ] [ | { begin | exclude | include } regular-expression ]

display ip routing-table ip-address1 { mask | mask-length } ip-address2 { mask | mask-length } [ verbose ] [ | { begin | exclude | include } regular-expression ]

Views

Any view

Default command level

1: Monitor level

Parameters

ip-address: Specifies a destination IP address, in dotted decimal notation.

mask: Specifies the mask length, in dotted decimal notation.

mask-length: Specifies the mask length, an integer in the range of 0 to 32.

longer-match: Displays the route with the longest mask.

verbose: Displays detailed information about all routes. Without this argument, the command displays only brief information about active routes.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Usage guidelines

Executing the command with different parameters yields the following results:

· display ip routing-table ip-address:

¡ The system ANDs the input destination IP address with the subnet mask in each route entry.

¡ The system ANDs the destination IP address in each route entry with its own subnet mask.

If the two operations yield the same result for an entry and this entry is active, the entry is displayed.

· display ip routing-table ip-address mask:

¡ The system ANDs the input destination IP address with the input subnet mask.

¡ The system ANDs the destination IP address in each route entry with the input subnet mask.

If the two operations yield the same result for an entry and the entry is active with a subnet mask less than or equal to the input subnet mask, the entry is displayed.

· display ip routing-table ip-address longer-match:

¡ The system ANDs the input destination IP address with the subnet mask in each route entry.

¡ The system ANDs the destination IP address in each route entry with its own subnet mask.

If the two operations yield the same result for multiple entries that are active, the entry with the longest mask length is displayed.

· display ip routing-table ip-address mask longer-match:

¡ The system ANDs the input destination IP address with the input subnet mask.

¡ The system ANDs the destination IP address in each route entry with the input subnet mask.

If the two operations yield the same result for multiple entries with a mask less than or equal to the input subnet mask, the entry that is active with the longest mask length is displayed.

Examples

# Display brief information about the routes with destination IP address 11.0.0.1.

<Sysname> display ip routing-table 11.0.0.1

Routing Table : Public

Summary Count : 3

Destination/Mask Proto Pre Cost NextHop Interface

11.0.0.0/8 Static 60 0 0.0.0.0 NULL0

11.0.0.0/16 Static 60 0 0.0.0.0 NULL0

11.0.0.0/24 Static 60 0 0.0.0.0 NULL0

# Display brief information about the routes with destination IP address 11.0.0.1 and mask length 20.

<Sysname> display ip routing-table 11.0.0.1 20

Routing Table : Public

Summary Count : 3

Destination/Mask Proto Pre Cost NextHop Interface

11.0.0.0/8 Static 60 0 0.0.0.0 NULL0

11.1.0.0/16 Static 60 0 0.0.0.0 NULL0

# Display brief information about the routes with destination IP address 11.0.0.1 and the longest mask length.

<Sysname> display ip routing-table 11.0.0.1 longer-match

Routing Table : Public

Summary Count : 1

Destination/Mask Proto Pre Cost NextHop Interface

11.0.0.0/24 Static 60 0 0.0.0.0 NULL0

# Display brief information about the routes with destination IP address 11.0.0.1, mask length 20, and the longest mask length.

<Sysname> display ip routing-table 11.0.0.1 20 longer-match

Routing Table : Public

Summary Count : 1

Destination/Mask Proto Pre Cost NextHop Interface

11.0.0.0/16 Static 60 0 0.0.0.0 NULL0

# Display brief information about the routes with destination addresses in the range of 1.1.1.0 to 5.5.5.0.

<Sysname> display ip routing-table 1.1.1.0 24 5.5.5.0 24

Routing Table : Public

Destination/Mask Proto Pre Cost NextHop Interface

1.1.1.0/24 Direct 0 0 1.1.1.1 Vlan1

1.1.1.1/32 Direct 0 0 127.0.0.1 InLoop0

2.2.2.0/24 Direct 0 0 2.2.2.1 Vlan2

3.3.3.0/24 Direct 0 0 3.3.3.1 Vlan3

3.3.3.1/32 Direct 0 0 127.0.0.1 InLoop0

4.4.4.0/24 Direct 0 0 4.4.4.1 Vlan4

4.4.4.1/32 Direct 0 0 127.0.0.1 InLoop0

For command output, see Table 1.

display ip routing-table protocol

Use display ip routing-table protocol to display information about routes installed by a routing protocol.

Syntax

display ip routing-table protocol protocol [ inactive | verbose ] [ | { begin | exclude | include } regular-expression ]

Views

Any view

Default command level

1: Monitor level

Parameters

protocol: Specifies a routing protocol. It can be direct or static.

inactive: Displays information about only inactive routes. Without this argument, the command displays information about all routes.

verbose: Displays detailed routing table information. Without this argument, the command displays brief routing table information.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Examples

# Display brief information about direct routes.

<Sysname> display ip routing-table protocol direct

Public Routing Table : Direct

Summary Count : 6

Direct Routing Table Status : <Active>

Summary Count : 6

Destination/Mask Proto Pre Cost NextHop Interface

2.2.2.0/24 Direct 0 0 2.2.2.1 Vlan2

2.2.2.2/32 Direct 0 0 127.0.0.1 InLoop0

127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0

127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0

192.168.80.0/24 Direct 0 0 192.168.80.10 Vlan3

192.168.80.10/32 Direct 0 0 127.0.0.1 InLoop0

Direct Routing Table Status : <Inactive>

Summary Count : 0

# Display brief information about static routes.

<Sysname> display ip routing-table protocol static

Public Routing Table : Static

Summary Count : 2

Static Routing Table Status : <Active>

Summary Count : 0

Static Routing Table Status : <Inactive>

Summary Count : 2

Destination/Mask Proto Pre Cost NextHop Interface

1.2.3.0/24 Static 60 0 1.2.4.5 Vlan10

3.0.0.0/8 Static 60 0 2.2.2.2 Vlan3

For command output, see Table 1.

display ip routing-table statistics

Use display ip routing-table statistics to display IPv4 route statistics.

Syntax

display ip routing-table statistics [ | { begin | exclude | include } regular-expression ]

Views

Any view

Default command level

1: Monitor level

Parameters

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Examples

# Display IPv4 route statistics for the public network.

<Sysname> display ip routing-table statistics

Proto route active added deleted freed

DIRECT 4 4 6 2 2

STATIC 1 0 1 0 0

Total 5 4 7 2 2

Table 3 Command output

Field	Description
Proto	Routing protocol that installed the route.
route	Number of routes installed by the protocol.
active	Number of active routes.
added	Number of routes added into the routing table since the router started up or the routing table was most recently cleared.
deleted	Number of routes marked as deleted, which will be cleared after a period.
freed	Number of routes that were permanently removed.
Total	Total number of routes.

display ipv6 routing-table

Use display ipv6 routing-table to display brief IPv6 routing table information, including destination IP address and prefix, protocol type, priority, metric, next hop and output interface.

Use display ipv6 routing-table verbose to display detailed information about all IPv6 routes, including both active and inactive routes.

Syntax

display ipv6 routing-table [ verbose ] [ | { begin | exclude | include } regular-expression ]

Views

Any view

Default command level

1: Monitor level

Parameters

verbose: Displays detailed information about all IPv6 routes, including both active and inactive routes. Without this keyword, the command displays only brief information about active routes.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Usage guidelines

The display ipv6 routing-table command displays brief information about only active routes.

The display ipv6 routing-table verbose command displays statistics about the entire routing table, and detailed information about each route.

Examples

# Display brief routing table information.

<Sysname> display ipv6 routing-table

Routing Table : Public

Destinations : 1 Routes : 1

Destination: ::1/128 Protocol : Direct

NextHop : ::1 Preference: 0

Interface : InLoop0 Cost : 0

Table 4 Command output

Field	Description
Destination	IPv6 address of the destination network/host.
NextHop	Next hop address of the route.
Preference	Preference of the route.
Interface	Output interface.
Protocol	Protocol that installed the route.
Cost	Cost of the route.

# Display detailed routing table information.

<Sysname> display ipv6 routing-table verbose

Routing Table : Public

Destinations : 1 Routes : 1

Destination : ::1 PrefixLength : 128

NextHop : ::1 Preference : 0

IpPrecedence : QosLcId :

RelayNextHop : :: Tag : 0H

Neighbor : :: ProcessID : 0

Interface : InLoopBack0 Protocol : Direct

State : Active NoAdv Cost : 0

Tunnel ID : 0x0 Label : NULL

Age : 22161sec

Table 5 Command output

Field	Description
Destination	IPv6 address of the destination network/host.
PrefixLength	Prefix length of the address.
NextHop	Next hop address of the route.
Preference	Preference of the route.
IpPrecedence	IP precedence.
QosLcId	Local QoS ID.
RelayNextHop	Recursive next hop.
Tag	Tag of the route.
Neighbor	Address of the neighbor determined by the routing protocol.
Interface	Output interface.
Protocol	Routing protocol.
State	State of the route: · Active. · Inactive. · Adv (advertised). · NoAdv (not advertised).
Cost	Cost of the route.
Age	Time that has elapsed since the route was generated.

display ipv6 routing-table ipv6-address

Use display ipv6 routing-table ipv6-address to display information about routes to an IPv6 destination address.

Use display ipv6 routing-table ipv6-address1 ipv6-address2 to display information about routes to a range of IPv6 destination addresses.

Syntax

display ipv6 routing-table ipv6-address [ prefix-length ] [ longer-match ] [ verbose ] [ | { begin | exclude | include } regular-expression ]

display ipv6 routing-table ipv6-address1 prefix-length1 ipv6-address2 prefix-length2 [ verbose ] [ | { begin | exclude | include } regular-expression ]

Views

Any view

Default command level

1: Monitor level

Parameters

ipv6-address: Specifies an IPv6 destination address.

prefix-length: Specifies the prefix length in the range of 0 to 128.

longer-match: Displays the matched route entry with the longest prefix length.

ipv6-address1/ipv6-address2: Specifies an IPv6 destination address range.

prefix-length1/prefix-length2: Specifies the prefix length in the range of 0 to 128.

verbose: Displays detailed information about all routes. Without this keyword, the command displays only brief information about active routes.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Usage guidelines

Executing the command with different parameters yields the following results:

· display ipv6 routing-table ipv6-address:

¡ The system ANDs the input destination IPv6 address with the prefix length in each route entry.

¡ The system ANDs the destination IPv6 address in each route entry with the prefix length in each entry.

If the two operations yield the same result for an entry and this entry is active, the entry is displayed.

· display ipv6 routing-table ipv6-address prefix-length:

¡ The system ANDs the input destination IPv6 address with the input prefix length.

¡ The system ANDs the destination IPv6 address in each route entry with the input prefix length.

If the two operations yield the same result for an entry and the entry is active with a prefix length less than or equal to the input prefix length, the entry is displayed.

Only route entries that exactly match the input destination address and prefix length are displayed.

· display ipv6 routing-table ipv6-address longer-match:

¡ The system ANDs the input destination IPv6 address with the prefix length in each route entry.

¡ The system ANDs the destination IPv6 address in each route entry with the prefix length in each entry.

If the two operations yield the same result for multiple entries, the entry that is active with the longest prefix length is displayed.

· display ipv6 routing-table ipv6-address prefix-length longer-match:

¡ The system ANDs the input destination IPv6 address with the input prefix length.

¡ The system ANDs the destination IPv6 address in each route entry with the input prefix length.

If the two operations yield the same result for multiple entries with a prefix length less than or equal to the input prefix length, the entry that is active with the longest prefix length is displayed.

Examples

# Display brief information about the routes with destination IPv6 address 10::1.

<Sysname> display ipv6 routing-table 10::1

Routing Table: Public

Summary Count: 3

Destination: 10::/64 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

Destination: 10::/68 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

Destination: 10::/120 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

# Display brief information about the routes with destination IPv6 address 10::1 and prefix length 100.

<Sysname> display ipv6 routing-table 10::1 100

Routing Table: Public

Summary Count: 2

Destination: 10::/64 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

Destination: 10::/68 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

# Display brief information about the routes with destination IPv6 address 10::1 and the longest prefix length.

<Sysname> display ipv6 routing-table 10::1 longer-match

Routing Tables: Public

Summary Count : 1

Destination: 10::/120 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

# Display brief information about the routes with destination IPv6 address 10::1, prefix length 100, and the longest prefix length.

<Sysname> display ipv6 routing-table 10::1 100 longer-match

Routing Table: Public

Summary Count: 1

Destination: 10::/68 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

# Display brief information about the routes with destination IPv6 addresses in the range of 100::/64 to 300::/64.

<Sysname> display ipv6 routing-table 100:: 64 300:: 64

Routing Table : Public

Summary Count : 3

Destination: 100::/64 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

Destination: 200::/64 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

Destination: 300::/64 Protocol : Static

NextHop : :: Preference: 60

Interface : NULL0 Cost : 0

Cost : 0

For command output, see Table 4.

display ipv6 routing-table protocol

Use display ipv6 routing-table protocol to display IPv6 routes installed by a routing protocol.

Syntax

display ipv6 routing-table protocol protocol [ inactive | verbose ] [ | { begin | exclude | include } regular-expression ]

Views

Any view

Default command level

1: Monitor level

Parameters

protocol: Specifies a routing protocol. The protocol can be direct or static.

inactive: Displays information about inactive routes. Without the keyword, the command displays information about all routes.

verbose: Displays detailed information about all routes. Without this keyword, the command displays only brief information about active routes.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Examples

# Display brief information about all direct routes.

<Sysname> display ipv6 routing-table protocol direct

Public Routing Table : Direct

Summary Count : 1

Direct Routing Table Status : <Active>

Summary Count : 1

Destination: ::1/128 Protocol : Direct

NextHop : ::1 Preference: 0

Interface : InLoop0 Cost : 0

Direct Routing Table Status : <Inactive>

Summary Count : 0

For command output, see Table 4.

display ipv6 routing-table statistics

Use display ipv6 routing-table statistics to display IPv6 route statistics.

Syntax

display ipv6 routing-table statistics [ | { begin | exclude | include } regular-expression ]

Views

Any view

Default command level

1: Monitor level

Parameters

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Examples

# Display IPv6 route statistics for the public network.

<Sysname> display ipv6 routing-table statistics

Protocol route active added deleted freed

DIRECT 1 1 1 0 0

STATIC 0 0 0 0 0

Total 1 1 1 0 0

Table 6 Command output

Field	Description
Protocol	Routing protocol that installed the route.
route	Number of routes installed by the protocol.
active	Number of active routes.
added	Number of routes added to the routing table after the router started up or the routing table was most recently cleared.
deleted	Number of routes marked as deleted, which will be cleared after a period.
freed	Number of routes that were permanently removed.
Total	Total number of routes.

reset ip routing-table statistics protocol

Use reset ip routing-table statistics protocol to clear IPv4 route statistics.

Syntax

reset ip routing-table statistics protocol { protocol | all }

Views

User view

Default command level

2: System level

Parameters

protocol: Clears route statistics for the IPv4 routing protocol. It can be direct or static.

all: Clears route statistics for all IPv4 routing protocols.

Examples

# Clear route statistics for all routing protocols.

<Sysname> reset ip routing-table statistics protocol all

reset ipv6 routing-table statistics

Use reset ipv6 routing-table statistics to clear IPv6 route statistics.

Syntax

reset ipv6 routing-table statistics protocol { protocol | all }

Views

User view

Default command level

2: System level

Parameters

protocol: Clears route statistics for an IPv6 routing protocol. It can be direct or static.

all: Clears route statistics for all IPv6 routing protocols.

Examples

# Clear route statistics for the public network.

<Sysname> reset ipv6 routing-table statistics protocol all

04-Layer 3 Command Reference

Basic IP routing commands

display ip routing-table

display ip routing-table ip-address

display ip routing-table protocol

display ip routing-table statistics

display ipv6 routing-table

display ipv6 routing-table ipv6-address

display ipv6 routing-table protocol

display ipv6 routing-table statistics

reset ip routing-table statistics protocol

reset ipv6 routing-table statistics

Cloud & AI

Intelligent Connection

Intelligent Computing

Intelligent Storage

Security

SMB Products

Intelligent Terminal Products

Industry Solutions

Product Support Services

Technical Service Solutions

Resource Center

Policy

Online Help

Technical Blogs

Training & Certification

Become a Partner

Partner Policy & Program

Global Learning

Partner Sales Resources

Partner Business Management

Service Business

Profile

News & Events

Online Exhibition Center

Contact Us