- 产品与解决方案
- 行业解决方案
- 服务
- 支持
- 合作伙伴
- 新华三人才研学中心
- 关于我们
04-V7 FIT模式切换为V5 FAT模式操作指导
本章节下载： 04-V7 FIT模式切换为V5 FAT模式操作指导 (190.36 KB)
V7 FIT模式切换为V5 FAT模式操作指导
Copyright © 2021 新华三技术有限公司 版权所有，保留一切权利。
非经本公司书面许可，任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部，并不得以任何形式传播。
除新华三技术有限公司的商标外，本手册中出现的其它公司的商标、产品标识及商品名称，由各自权利人拥有。
本文档中的信息可能变动，恕不另行通知。
目 录
1.1 V7的Fit AP切换到V5的Fat AP（无AC，有console）
1.1.1 上传V5 Fat AP的版本文件并降级BootWare版本
1.1.3 上传V5 Fat AP的版本文件并更新AP的版本
1.2 V7的Fit AP切换到V5的Fat AP（有AC，有console）
(1) 重启设备，当出现“Press Ctrl+B to enter extended boot menu...”，键入<Ctrl+B>，系统进入BootWare主菜单：
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing.............................Done!
****************************************************************************
* *
* H3C WAP712C BootWare, Version 7.15 *
* *
****************************************************************************
Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.
Compiled Date : Mar 1 2019
CPU Type : ATHEROS AR9563
CPU L1 Cache : 32KB
CPU Clock Speed : 775MHz
Memory Type : SDRAM
Memory Size : 128MB
Memory Speed : 560MHz
BootWare Size : 512KB
Flash Size : 16MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
(2) 在BootWare主菜单下键入<Ctrl+F>，并输入“Y”格式化存储介质：
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9):
Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y.....
............................................................................
..................
Format success.
(3) 在BootWare主菜单，选择<3>，进入以太网操作子菜单：
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 3
(4) 在以太网操作子菜单，选择<5>，设置以太网参数：
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5): 5
(5) 在以太网参数设置菜单，根据实际配置设置正确的以太网参数：
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :ftp
Load File Name :wa4300s.ipe
: wa4300s_fat.bin
Target File Name :wa4300s.ipe
: wa4300s_fat.bin
Server IP Address :192.168.0.10
Local IP Address :192.168.0.50
Subnet Mask :255.255.255.0
Gateway IP Address :0.0.0.0
FTP User Name :user
FTP User Password :******
(6) 选择<1>，降级BootWare版本：
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5): 1
Loading.....................................................................
............Done.
11293696 bytes downloaded!
(7) 选择“Y”，更新BootWare版本：
Extended BootWare Version is not equal,updating? [Y/N]Y
Updating Extended BootWare..........Done.
BootWare updated,System is rebooting now.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing.............................Done!
****************************************************************************
* *
* H3C WAP712C BootWare, Version 1.06 *
* *
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date : Mar 27 2017
CPU Type : ATHEROS AR9563
CPU L1 Cache : 32KB
CPU Clock Speed : 775MHz
Memory Type : SDRAM
Memory Size : 128MB
Memory Speed : 560MHz
BootWare Size : 512KB
Flash Size : 16MB
PCB Version : Ver.A
(1) 当出现“Press Ctrl+B to enter extended boot menu...”，键入<Ctrl+B>，系统进入BootWare主菜单后，键入<Ctrl+Y>，切换AP模式：
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Ctrl+F: Format File System
Enter your choice(0-9):
(2) 选择<1>，将AP由Fit模式切换成Fat模式：
Please select the new mode
Current mode is Fit
============================================================================
|NO. Mode |
|1 Fat Mode |
|2 Fit Mode |
|0 Exit |
============================================================================
Enter your choice(0-2):1
Changed to fat mode successfully!
（4）切换AP模式之后键入<Ctrl+F>格式化设备。
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Ctrl+F: Format File System
Enter your choice(0-9):
Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y.....
............................................................................
..................
Format success.
(1) 在BootWare主菜单，选择<3>，进入以太网操作子菜单：
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Ctrl+F: Format File System
Enter your choice(0-9): 3
(2) 在以太网操作子菜单，选择<3>，设置以太网参数：
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-3): 3
(3) 在以太网参数设置菜单，根据实际配置设置正确的以太网参数：
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :ftp
Load File Name :wa4300s_fat.bin
:
Target File Name :wa4300s_fat.bin
:
Server IP Address :192.168.1.1 192.168.0.10
Local IP Address :192.168.1.50 192.168.0.50
Gateway IP Address :0.0.0.0
FTP User Name :admin user
FTP User Password :password 123456
(4) 在以太网操作子菜单，选择<2>，更新AP版本：
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-3): 2
Loading.....................................................................
............Done!
11293696 bytes downloaded!
Updating File flash:/wa4300s_fat.bin........................................
............................................................................
...........................................................Done!
(5) 选择<0>，返回BootWare主菜单：
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-3): 0
(6) 在BootWare主菜单，选择<0>，AP重启后就可以发现AP已经由V7的Fit AP切换成V5的Fat AP。
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Ctrl+F: Format File System
Enter your choice(0-9): 0
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
(1) 在有V5的AC配合下，若是有多个V7的Fit AP需要降级，可以通过V5的AC先将其降级成V5的Fit AP。在V5的AC上配置AP模板，并将AP对应的V5版本导入AC设备，然后在AC的隐藏视图下开启CAPWAP功能，保证其可以上线。
a. 进入隐藏视图下开启FPL-DIAG。
[AC]_h
Now you enter a hidden command view for developer's testing, some commands may
affect operation by wrong use, please carefully use it with our engineer's
direction.
[AC-hidecmd]fpl-diag enable
Are you sure you want to enable FPL-DIAG? [Y/N] y
% FPL-DIAG has been enabled.
b. 开启CAPWAP功能。
[AC-hidecmd]fpl-diag drv_capwap_set 1
(2) 开启CAPWAP功能后，保存配置并重启设备生效。等待AP下载V5版本，并刷新为低版本的V5 Bootware后再关闭V5平台AC的CAPWAP功能。
a. 在隐藏视图下开启FPL-DIAG。
[AC-hidecmd]fpl-diag enable
Are you sure you want to enable FPL-DIAG? [Y/N] y
% FPL-DIAG has been enabled.
b. 关闭CAPWAP功能，保存配置并重启设备生效。
[AC-hidecmd]fpl-diag drv_capwap_set 0
(3) 当AP在V5的AC上线后，已经切换为V5 Fit版本。此时需要通过Console口登录到AP上，将V5 Fit模式切换成V5 Fat模式，同时传入Fat版本。详细操作步骤可参考1.1.2 切换AP模式和1.1.3 上传V5 Fat AP的版本文件并更新AP的版本。
不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!
支持
