Contents

HH3C-LAG-MIB· 1

About this MIB· 1

MIB file name· 1

Notifications· 1

hh3cAggPortInactiveNotification· 1

hh3cAggPortInactiveNotification2· 2

hh3cAggPortActiveNotification· 3

hh3cAggPartnerMisconnect 3

hh3cAggPartnerMisconnectResume· 4

hh3cAggAllMemberDown· 5

hh3cAggAllMemberDownRecovery· 6

hh3cAggAllMemberUp· 7

hh3cAggMemberLinkDown· 7

hh3cAggMemberLinkUp· 8

hh3cAggMemberCoutExceedThreshold· 9

hh3cAggMemberCoutExceedRecovery· 10

hh3cAggMemberNumberChanged· 11

hh3cAggLacpPartnerExpired· 12

hh3cAggPortLacpInactive· 13

hh3cAggPortLacpNegotiateFailed· 14

hh3cAggPortLacpNegotiateRecovery· 15

hh3cAggMemberChange· 16

hh3cAggTotalLinkLossResume· 20

hh3cAggPartialLinkLoss· 21

hh3cAggPartialLinkLossResume· 22

hh3cAggPortMadDetect 23

 

 

HH3C-LAG-MIB

About this MIB

This MIB contains information in ieee8023-lag.mib and hh3c-lag.mib.

MIB file name

hh3c-lag.mib

Notifications

hh3cAggPortInactiveNotification

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.2.2	An aggregation member port became unselected.	Informational	Warning	-	ON

 

Notification triggers

This notification is generated when an aggregation member port becomes unselected.

System impact

Traffic interruption

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	1..40960

 

Recommended action

To resolve this issue:

1.Verify that the aggregation member port is physically up.

2.Verify that the attribute configuration of the aggregation member port is the same as that of the aggregate interface.

3.Repeat step 1 and step 2 on the peer port if the aggregate interface operates in dynamic mode.

4.If the issue persists, contact H3C Support.

hh3cAggPortInactiveNotification2

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.2.3	An aggregation member port became unselected.	Informational	Warning	-	ON

 

Notification triggers

This notification is generated when an aggregation member port becomes unselected.

System impact

Service interruption.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	1..40960
1.3.6.1.4.1.25506.8.25.1.2.1.1 (hh3cAggPortIndex)	Aggregation member port index.	hh3cAggPortIndex	Integer32	As per the MIB.
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.2 (hh3cAggMemberPortName)	Aggregation member port name.	N/A	OCTET_STRING	OCTET_STRING (0..255)

 

Recommended action

To resolve this issue:

1.Verify that the aggregation member port is physically up.

2.Verify that the attribute configuration of the aggregation member port is the same as that of the aggregate interface.

3.Repeat step 1 and step 2 on the peer port if the aggregate interface operates in dynamic mode.

4.If the issue persists, contact H3C Support.

hh3cAggPortActiveNotification

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.2.4	An aggregation member port becomes selected.	Informational	Warning	N/A (N/A)	ON

 

Notification triggers

This notification is generated when an aggregation member port becomes selected.

System impact

The aggregation member port can forward traffic.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	1..40960
1.3.6.1.4.1.25506.8.25.1.2.1.1 (hh3cAggPortIndex)	Aggregation member port index.	hh3cAggPortIndex	Integer32	As per the MIB.
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.2 (hh3cAggMemberPortName)	Aggregation member port name.	N/A	OCTET_STRING	OCTET_STRING (0..255)

 

Recommended action

No action is required.

hh3cAggPartnerMisconnect

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.5	An aggregation member port is misconnected to a peer port.	Error	Warning	1.3.6.1.4.1.25506.8.25.0.6 (hh3cAggPartnerMisconnectResume)	ON

 

Notification triggers

This notification might be generated when the following events occur:

The system ID and Key of the peer member port of an aggregation group in LACP mode was inconsistent with those of the current interface.

Negotiation failed between the peer member port and the current interface.

System impact

User services are interrupted or services interrupted after the device restarts.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	1..40960
1.3.6.1.4.1.25506.8.25.1.2.1.1 (hh3cAggPortIndex)	Aggregation member port index.	hh3cAggPortIndex	Integer32	As per the MIB.

 

Recommended action

To resolve this issue:

1.Check whether the peer link is connected correctly and is assigned to the correct aggregation group. If incorrect connection exists, go to step 2.

2.Configure the aggregation group correctly for the peer end, and check whether the alarm is cleared. If the alarm is not cleared, go to step 3.

3.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cAggPartnerMisconnectResume

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.6	A misconnection is corrected on an aggregation member port.	Recovery	Warning	N/A (N/A)	ON

 

Notification triggers

This notification is generated when the peer link of an aggregation member port in LACP mode is connected correctly.

System impact

User services are recovered.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	1..40960
1.3.6.1.4.1.25506.8.25.1.2.1.1 (hh3cAggPortIndex)	Aggregation member port index.	hh3cAggPortIndex	Integer32	As per the MIB.

 

Recommended action

No action is required.

hh3cAggAllMemberDown

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.7	All member ports in an aggregation group go down.	Error	Warning	1.3.6.1.4.1.25506.8.25.0.8 (hh3cAggAllMemberDownRecovery)	ON

 

Notification triggers

This notification is generated when all member ports in an aggregation group go down.

System impact

The aggregate interface of the aggregation group cannot forward traffic.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)

 

Recommended action

To resolve this issue:

1.Execute the display interface brief command and check whether all member ports are down:

  - If yes, go to step 2.

  - If not, go to step 5.

2.Use the undo shutdown command to bring up the member ports. If the alarm is not cleared, go to step 3.

3.Check whether physical link issues exist, such as a loose cable or transceiver module:

  - If yes, go to step 4.

  - If not, go to step 5.

4.Install the physical link correctly. If the alarm is not cleared, go to step 5.

5.Execute the display link-aggregation verbose command to check whether the aggregation group contains member ports:

  - If yes, go to step 7.

  - If not, go to step 6.

6.Use the port link-aggregation group command to assign Ethernet interfaces to the aggregation group. If the alarm is not cleared, go to step 7.

7.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cAggAllMemberDownRecovery

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.8	An aggregation group has the first up member port.	Recovery	Warning	-	ON

 

Notification triggers

This notification is generated when an aggregation group has the first up member port.

System impact

The aggregate interface of the aggregation group can forward traffic.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)

 

Recommended action

No action is required.

hh3cAggAllMemberUp

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.9	All member ports in an aggregation group came up.	Informational	Warning	-	ON

 

Notification triggers

This notification is generated when all member ports in an aggregation group come up.

System impact

The aggregate interface of the aggregation group can forward traffic.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)

 

Recommended action

No action is required.

hh3cAggMemberLinkDown

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.10	A member port went down in an aggregation group.	Error	Warning	1.3.6.1.4.1.25506.8.25.0.11 (hh3cAggMemberLinkUp)	ON

 

Notification triggers

This notification is generated when a member port goes down in an aggregation group.

System impact

Traffic forwarding is interrupted on the member port.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.2 (hh3cAggMemberPortName)	Aggregation member port name.	N/A	OCTET_STRING	OCTET_STRING (0..255)

 

Recommended action

To resolve this issue:

1.Execute the display interface brief command and check whether the member port is down:

  - If yes, go to step 2.

  - If not, go to step 5.

2.Use the undo shutdown command to bring up the member port. If the alarm is not cleared, go to step 3.

3.Check whether physical link issues exist, such as a loose cable or transceiver module:

  - If yes, go to step 4.

  - If not, go to step 5.

4.Install the physical link correctly. If the alarm is not cleared, go to step 5.

5.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cAggMemberLinkUp

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.11	A member port came up in an aggregation group.	Recovery	Warning	-	ON

 

Notification triggers

This notification might be generated when the following events occur:

A member port is brought up by using the undo shutdown command.

Interface or link failure is resolved on a member port.

The link layer comes up on a member port.

System impact

The member port can forward traffic.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.2 (hh3cAggMemberPortName)	Aggregation member port name.	N/A	OCTET_STRING	OCTET_STRING (0..255)

 

Recommended action

No action is required.

hh3cAggMemberCoutExceedThreshold

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.12	The maximum number of selected ports was exceeded in an aggregation group.	Error	Warning	1.3.6.1.4.1.25506.8.25.0.13 (hh3cAggMemberCoutExceedRecovery)	ON

 

Notification triggers

This notification is generated when the maximum number of selected ports is exceeded in an aggregation group.

System impact

No impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.7 (hh3cAggUpThreshold)	Maximum number of selected ports.	N/A	Integer32	Integer32 (1..2147483647)

 

Recommended action

To resolve this issue:

1.Execute the display link-aggregation verbose command to verify that all member ports are up and forwarding traffic.

2.If some member ports are not in use, remove them from the aggregation group by using the undo port link-aggregation group command.

hh3cAggMemberCoutExceedRecovery

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.13	The number of selected ports in an aggregation group dropped to or below the maximum number of selected ports.	Recovery	Warning	-	ON

 

Notification triggers

This notification is generated when the number of selected ports in an aggregation group drops below the maximum number of selected ports.

System impact

No impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.7 (hh3cAggUpThreshold)	Maximum number of selected ports.	N/A	Integer32	Integer32 (1..2147483647)

 

Recommended action

No action is required.

hh3cAggMemberNumberChanged

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.14	The number of selected ports changed in an aggregation group.	Informational	Warning	-	ON

 

Notification triggers

This notification might be generated when the following events occur:

A member port comes up.

A member port goes down.

System impact

No impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.2 (hh3cAggMemberPortName)	Aggregation member port name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.6 (hh3cAggTotalActiveNum)	Number of selected ports.	N/A	Integer32	Integer32 (1..2147483647)
1.3.6.1.4.1.25506.8.25.4.8 (hh3cAggReasonCode)	Cause of change.	N/A	OCTET_STRING	OCTET_STRING (0..255)

 

Recommended action

To resolve this issue:

● If a member port comes up, no action is required.

● If a member port goes down, check for the link down alarm for the member port and resolve the issue based on the cause.

hh3cAggLacpPartnerExpired

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.15	The LACP timeout timer expired for the peer of an aggregation member port.	Informational	Warning	-	ON

 

Notification triggers

This notification is generated when the LACP timeout timer expires for the peer of an aggregation member port.

System impact

The bandwidth of the member port decreases or even drops to 0, and traffic of some or even all services is interrupted.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.2 (hh3cAggMemberPortName)	Aggregation member port name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	1..40960

 

Recommended action

To resolve this issue:

1.Execute the display interface brief command and check whether the member port is down:

  - If yes, go to step 2.

  - If not, go to step 5.

2.Use the undo shutdown command to bring up the member port. If the alarm is not cleared, go to step 3.

3.Check whether physical link issues exist, such as a loose cable or transceiver module:

  - If yes, go to step 4.

  - If not, go to step 5.

4.Install the physical link correctly. If the alarm is not cleared, go to step 5.

5.Verify that dynamic link aggregation is correctly configured on the peer. If the alarm is not cleared, go to step 6.

6.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cAggPortLacpInactive

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.16	An aggregation member port cannot be selected after receiving an LACPDU.	Event alarm	Warning	-	ON

 

Notification triggers

This notification might be generated when the following events occur:

The peer system ID in LACPDUs changes.

The peer key in LACPDUs changes.

The peer port number in LACPDUs changes.

The aggregation bit of the peer state field in LACPDUs changes.

The aggregation bit of the local state field in LACPDUs changes.

System impact

The member port cannot forward traffic.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.2 (hh3cAggMemberPortName)	Aggregation member port name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	Interger32 (1..40960)
1.3.6.1.4.1.25506.8.25.4.3 (hh3cAggOldPduInfo)	Old PDU information.	N/A	OCTET_STRING	OCTET_STRING (0..512)
1.3.6.1.4.1.25506.8.25.4.4 (hh3cAggNewPduInfo)	New PDU information.	N/A	OCTET_STRING	OCTET_STRING (0..512)
1.3.6.1.4.1.25506.8.25.4.5 (hh3cAggPduChangeCode)	Changed PDU information.	N/A	OCTET_STRING	OCTET_STRING (0..255)

 

Recommended action

To resolve this issue:

1.Execute the display interface brief command and check whether the member port is down:

  - If yes, go to step 2.

  - If not, go to step 5.

2.Use the undo shutdown command to bring up the member port. If the alarm is not cleared, go to step 3.

3.Check whether physical link issues exist, such as a loose cable or transceiver module:

  - If yes, go to step 4.

  - If not, go to step 5.

4.Install the physical link correctly. If the alarm is not cleared, go to step 5.

5.Execute the display link-aggregation verbose command to verify whether the aggregation group contains the member port:

  - If yes, go to step 7.

  - If not, go to step 6.

6.Use the port link-aggregation group command to assign the member port to the aggregation group. If the alarm is not cleared, go to step 7.

7.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cAggPortLacpNegotiateFailed

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.17	Negotiation failed on a member port in a dynamic aggregation group.	Error	Warning	1.3.6.1.4.1.25506.8.25.0.18 (hh3cAggPortLacpNegotiateRecovery)	ON

 

Notification triggers

This notification might be generated when the following events occur:

A link goes down.

No LACPDUs are received before the LACPDU reception timeout timer expires.

System impact

The member port cannot forward traffic.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.2 (hh3cAggMemberPortName)	Aggregation member port name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	Interger32 (1..40960)

 

Recommended action

To resolve this issue:

1.Execute the display this command and check whether the ports at the ends of the link are shut down:

  - If yes, use the undo shutdown command to bring up the member ports. If the alarm is not cleared, go to step 2.

  - If not, go to step 2.

2.Check whether physical link issues exist, such as a loose cable or transceiver module:

  - If yes, install the physical link correctly. If the alarm is not cleared, go to step 3.

  - If not, go to step 3.

3.Execute the display link-aggregation verbose command to verify whether the local or peer member port exits its aggregation group:

  - If the member port exits its aggregation group unexpectedly, use the port link-aggregation group command to assign it to the aggregation group. If the alarm is not cleared, go to step 4.

  - If the member port exits its aggregation group correctly, go to step 4.

4.Collect alarm information, log messages, and configuration data, and then contact H3C Support for help.

hh3cAggPortLacpNegotiateRecovery

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.18	Negotiation succeeded on a member port in a dynamic aggregation group.	Recovery	Warning	-	ON

 

Notification triggers

This notification might be generated when the following events occur:

The first negotiation succeeds on a member link.

Negotiation on a member link has failed, and the hh3cAggPortLacpNegotiateFailed notification has been triggered. When the member link recovers, the hh3cAggPortLacpNegotiateRecovery notification is triggered.

System impact

The member port can forward traffic.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.2 (hh3cAggMemberPortName)	Aggregation member port name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	Interger32 (1..40960)

 

Recommended action

No action is required.

hh3cAggMemberChange

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.19	Aggregation member port change.	Informational	Warning	-	ON

 

Notification triggers

This notification is generated when the status of an aggregation member port changes.

System impact

No impact on services.

Objects

OID (object name)

Description

Index nodes

Type

Value range

 

1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)

Aggregate interface name.

N/A

OCTET_STRING

OCTET_STRING (0..255)

 

1.3.6.1.4.1.25506.8.25.4.2 (hh3cAggMemberPortName)

Aggregation member port name.

N/A

OCTET_STRING

OCTET_STRING (0..255)

 

1.3.6.1.4.1.25506.8.25.4.9 (hh3cAggChangeType)

Aggregation member port change type.

N/A

INTEGER

INTEGER

(1, 2, 3)

 

Recommended action

Check the status of the involved aggregation member port.

hh3cAggPortLacpActive

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

 

1.3.6.1.4.1.25506.8.25.0.20

An aggregation member port received an LACPDU that notifies it to become selected.

Informational

Warning

-

ON

 

Notification triggers

This notification is generated when an aggregation member port receives an LACPDU that notifies it to become selected.

System impact

The member port can forward traffic.

Objects

OID (object name)

Description

Index nodes

Type

Value range

 

1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)

Aggregate interface name.

N/A

OCTET_STRING

OCTET_STRING (0..255)

 

1.3.6.1.4.1.25506.8.25.4.2 (hh3cAggMemberPortName)

Aggregation member port name.

N/A

OCTET_STRING

OCTET_STRING (0..255)

 

1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)

Aggregation group ID.

hh3cAggLinkNumber

Integer32

Interger32 (1..40960)

 

Recommended action

No action is required.

hh3cAggTotalLinkLoss

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

 

1.3.6.1.4.1.25506.8.25.0.21

The bandwidth became 0 on all member ports in an aggregation group.

Error

Warning

1.3.6.1.4.1.25506.8.25.0.22 (hh3cAggTotalLinkLossResume)

ON

 

Notification triggers

This notification is generated when the bandwidth becomes 0 on all member ports in an aggregation group because no member port is selected.

System impact

Traffic forwarding is interrupted.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	Interger32 (1..40960)

 

Recommended action

To resolve this issue:

1.Execute the display interface brief command and check whether all member ports are down:

  - If yes, go to step 2.

  - If not, go to step 4.

2.Use the undo shutdown command to bring up the member ports. Check whether the alarm is cleared:

  - If yes, no action is required.

  - If not, go to step 3.

3.Check whether physical link issues exist:

  - If yes, go to step 5

  - If not, go to step 4.

4.Execute the display link-aggregation verbose command to check whether the aggregation group contains member ports:

  - If yes, go to step 7.

  - If not, go to step 6.

5.Install the physical link correctly. Check whether the alarm is cleared:

  - If yes, no action is required.

  - If not, go to step 4.

6.Use the port link-aggregation group command to assign Ethernet interfaces to the aggregation group. Check whether the alarm is cleared:

  - If yes, no action is required.

  - If not, go to step 7.

7.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cAggTotalLinkLossResume

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.22	The bandwidth recovered on all member ports in an aggregation group.	Recovery	Warning	-	ON

 

Notification triggers

This notification is generated when the bandwidth recovers on all member ports in an aggregation group.

System impact

Traffic forwarding is resumed on the aggregate interface of the aggregation group.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	Interger32 (1..40960)

 

Recommended action

No action is required.

hh3cAggPartialLinkLoss

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.23	The bandwidth became 0 on a member port in an aggregation group.	Error	Warning	1.3.6.1.4.1.25506.8.25.0.24 (hh3cAggPartialLinkLossResume)	ON

 

Notification triggers

This notification is generated when the bandwidth becomes 0 on a member port in an aggregation group because the member port is not selected.

System impact

Traffic forwarding is interrupted on the member port.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.2 (hh3cAggMemberPortName)	Aggregation member port name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	Interger32 (1..40960)

 

Recommended action

To resolve this issue:

1.Execute the display interface brief command and check whether the member port is down:

  - If yes, go to step 2.

  - If not, go to step 4.

2.Use the undo shutdown command to bring up the member port. Check whether the alarm is cleared:

  - If yes, no action is required.

  - If not, go to step 3.

3.Check whether physical link issues exist:

  - If yes, go to step 5

  - If not, go to step 4.

4.Execute the display link-aggregation verbose command to check whether the aggregation group contains the member port:

  - If yes, go to step 7.

  - If not, go to step 6.

5.Install the physical link correctly. Check whether the alarm is cleared:

  - If yes, no action is required.

  - If not, go to step 4.

6.Use the port link-aggregation group command to assign the member port to the aggregation group. Check whether the alarm is cleared:

  - If yes, no action is required.

  - If not, go to step 7.

7.Collect alarm information and configuration data, and then contact H3C Support for help.

hh3cAggPartialLinkLossResume

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.24	The bandwidth recovered on a member port in an aggregation group.	Recovery	Warning	-	ON

 

Notification triggers

This notification is generated when the bandwidth recovers on a member port in an aggregation group.

System impact

Traffic forwarding is interrupted on the member port.

Status control

Traffic forwarding is resumed on the member port.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.4.2 (hh3cAggMemberPortName)	Aggregation member port name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	Interger32 (1..40960)

 

Recommended action

No action is required.

hh3cAggPortMadDetect

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.8.25.0.25	Aggregate interface MAD detection	Informational	Warning	-	ON

 

Notification triggers

This notification is triggered when the aggregate interface performs MAD detection.

System impact

Traffic forwarding is interrupted on the member port.

Status control

No negative impact on the system.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.8.25.4.1 (hh3cAggPortName)	Aggregate interface name.	N/A	OCTET_STRING	OCTET_STRING (0..255)
1.3.6.1.4.1.25506.8.25.1.1.1.1 (hh3cAggLinkNumber)	Aggregation group ID.	hh3cAggLinkNumber	Integer32	Interger32 (1..40960)

 

Recommended action

No action is required.