vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. The specified VPN instance must already exist.

ip-address: Specifies the IP address of a default next hop. If you do not specify the vpn-instance vpn-instance-name option, the default next hop belongs to the public network.

direct: Specifies a directly connected default next hop.

track track-entry-number: Specifies a track entry by its number in the range of 1 to 1024.

&<1-2>: Indicates that you can specify up to two default next hops, each of which can be associated with a track entry.

Usage guidelines

This command is not supported on SPC, CSPC (excluding CSPC-GE16XP4L-E, CSPC-GE24L-E, and CSPC-GP24GE8XP2L-E), or CMPE-1104 cards.

You can specify multiple default next hops for backup or load sharing in one command line or by executing this command multiple times.

If you do not specify a default next hop when you execute the undo form of this command, all default next hops on the node are removed.

Examples

# Set a directly-connected default next hop of 1.1.1.1.

<Sysname> system-view

[Sysname] policy-based-route aa permit node 11

[Sysname-pbr-aa-11] apply default-next-hop 1.1.1.1 direct

apply next-hop

Use apply next-hop to set next hops.

Use undo apply next-hop to remove next hops.

Syntax

apply next-hop [ vpn-instance vpn-instance-name ] { ip-address [ direct ] [ track track-entry-number ] }&<1-2>

undo apply next-hop [ [ vpn-instance vpn-instance-name ] ip-address&<1-2> ]

Default

No next hop is set.

Views

Policy node view

Predefined user roles

network-admin

Parameters

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. The specified VPN instance must already exist.

ip-address: Specifies the IP address of a next hop. If you do not specify the vpn-instance vpn-instance-name option, the next hop belongs to the public network.

direct: Specifies that the next hop must be directly connected to take effect.

track track-entry-number: Specifies a track entry by its number in the range of 1 to 1024.

&<1-2>: Indicates that you can specify up to two next hops, each of which can be associated with a track entry.

Usage guidelines

You can specify multiple next hops for backup or load sharing in one command line or by executing this command multiple times.

If you do not specify a next hop when you execute the undo form of this command, all next hops on the node are removed.

Examples

# Set a directly-connected next hop of 1.1.1.1.

<Sysname> system-view

[Sysname] policy-based-route aa permit node 11

[Sysname-pbr-aa-11] apply next-hop 1.1.1.1 direct

Related commands

ip policy-based-route-log enable

apply output-interface

Use apply output-interface to set output interfaces.

Use undo apply output-interface to remove output interfaces.

Syntax

apply output-interface { interface-type interface-number [ track track-entry-number ] }

undo apply output-interface [ interface-type interface-number ]

Default

No output interface is set.

Views

Policy node view

Predefined user roles

network-admin

Parameters

interface-type interface-number: Specifies an interface by its type and number.

track track-entry-number: Specifies a track entry by its number in the range of 1 to 1024.

Usage guidelines

This command is not supported on SPC, CSPC (excluding CSPC-GE16XP4L-E, CSPC-GE24L-E, and CSPC-GP24GE8XP2L-E), or CMPE-1104 cards.

The output interface must be P2P type. Using a non-P2P output interface can result in forwarding failures when the interface has multiple next hops. Non-P2P interfaces include broadcast and NBMA interfaces such as Ethernet and virtual-template interfaces.

If you do not specify an output interface when you execute the undo form of this command, all output interfaces on the node are removed.

Examples

# Specify GigabitEthernet 3/1/1 as the output interface for IP packets.

<Sysname> system-view

[Sysname] policy-based-route aa permit node 11

[Sysname-pbr-aa-11] apply output-interface gigabitethernet 3/1/1

apply precedence

Use apply precedence to set a precedence for IP packets.

Use undo apply precedence to restore the default.

Syntax

apply precedence { type | value }

undo apply precedence

Default

No precedence is set for IP packets.

Views

Policy node view

Predefined user roles

network-admin

Parameters

type: Specifies the precedence type for IP packets.

value: Specifies the precedence for IP packets. Eight precedence values (0 to 7) are available. Each precedence value corresponds to a precedence type, as shown in Table 1. You can set either a precedence value or a precedence type for IP packets.

Table 1 IP precedence value and type mappings

Precedence value	Precedence type
0	routine
1	priority
2	immediate
3	flash
4	flash-override
5	critical
6	internet
7	network

Examples

# Set the precedence to 5 (critical) for IP packets.

<Sysname> system-view

[Sysname] policy-based-route aa permit node 11

[Sysname-pbr-aa-11] apply precedence critical

display ip policy-based-route

Use display ip policy-based-route to display PBR policy information.

Syntax

display ip policy-based-route [ policy policy-name ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

policy policy-name: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. If you do not specify a policy, this command displays information for all PBR policies.

Examples

# Display all policy information.

<Sysname> display ip policy-based-route

Policy name: aaa

node 1 permit:

if-match acl 2000

apply next-hop 1.1.1.1

Table 2 Command output

Field	Description
node 1 permit	The match mode of Node 1 is permit.
if-match acl	Compares packets with the ACL.
apply next-hop	Specifies a next hop for permitted packets.

Related commands

policy-based-route

display ip policy-based-route interface

Use display ip policy-based-route interface to display interface PBR configuration and statistics.

Syntax

In standalone mode:

display ip policy-based-route interface interface-type interface-number [ slot slot-number ]

In IRF mode:

display ip policy-based-route interface interface-type interface-number [ chassis chassis-number slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface-type interface-number: Specifies an interface by its type and number.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command displays information on the active MPU. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. If you do not specify a card, this command displays information on the global active MPU. (In IRF mode.)

Examples

# Display PBR configuration and statistics on GigabitEthernet 3/1/1.

<Sysname> display ip policy-based-route interface gigabitethernet 3/1/1

Policy based routing information for interface GigabitEthernet3/1/1:

Policy name: aaa

node 0 deny:

Matched: 0

node 1 permit:

if-match acl 3999

Matched: 0

node 2 permit:

if-match acl 2000

apply next-hop 2.2.2.2

Matched: 0

node 5 permit:

if-match acl 3101

apply next-hop 1.1.1.1

apply output-interface GigabitEthernet3/1/2 track 1

apply output-interface GigabitEthernet3/1/3 track 2

Matched: 0

Total matched: 0

<Sysname> display ip policy-based-route interface gigabitethernet 3/1/1

Policy based routing information for interface GigabitEthernet3/1/1:

Policy name: aaa

node 0 deny:

Matched: 0

node 1 permit:

if-match acl 3999

Matched: 0

node 2 permit:

if-match acl 2000

apply next-hop 2.2.2.2

apply output-interface GigabitEthernet3/1/2 track 1

apply output-interface GigabitEthernet3/1/3 track 2

Matched: 0

node 5 permit:

if-match acl 3101

apply next-hop 1.1.1.1

Matched: 0

Total matched: 0

Table 3 Command output

Field	Description
Policy based routing information for interface xxxx	PBR configuration and statistics on the interface. This field displays failed in brackets if none of the nodes in the policy has been successfully issued to the driver. The failed status will persist even after the policy is successfully issued. To clear the failed status, you must remove the policy from the interface and then apply it on the interface again. NOTE: The failed status is available on a per-slot basis. To obtain this information, you must specify a slot number when you execute the command. · For a global interface (for example, a VLAN interface), which might have member physical interfaces on multiple slots, specify a slot that contains its member interfaces. · For a physical interface, specify its slot number.
node 0 deny node 2 permit	Match mode of the node, permit or deny. If a node fails to be issued to the driver, the command displays the cause in brackets, which include: · not support—The device does not support the match criteria configured on the node. · no resource—No sufficient resources (for example, ACLs) are available for the node. NOTE: The cause is available only on a per-slot basis. To obtain this information, you must specify a slot number when you execute the command. · For a global interface (for example, a VLAN interface), which might have member physical interfaces on multiple slots, specify a slot that contains its member interfaces. · For a physical interface, specify its slot number.
if-match acl	Compares packets with the ACL.
apply next-hop	Specifies a next hop for permitted packets.
apply output-interface track 1 (down)	Specifies an output interface and its associated track entry for permitted packets. This field displays the interface status in brackets. · up—The interface is up. · down—The interface is down at network layer. · inactive—The card that hosts the interface is not in position.
Matched: 0	Number of successful matches on the node. If the device does not have sufficient resources to count matches, this field displays no statistics resource in brackets. NOTE: The statistics collection failure cause is available only on a per-slot basis. To obtain this information, you must specify a slot number when you execute the command. · For a global interface (for example, a VLAN interface), which might have member physical interfaces on multiple slots, specify a slot that contains its member interfaces. · For a physical interface, specify its slot number.
Total matched	Total number of successful matches on all nodes.

Related commands

reset ip policy-based-route statistics

display ip policy-based-route local

Use display ip policy-based-route local to display local PBR configuration and statistics.

Syntax

In standalone mode:

display ip policy-based-route local [ slot slot-number ]

In IRF mode:

display ip policy-based-route local [ chassis chassis-number slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command displays local PBR configuration and statistics for the active MPU. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. If you do not specify a card, this command displays local PBR configuration and statistics for the global active MPU. (In IRF mode.)

Examples

# Display local PBR configuration and statistics.

<Sysname> display ip policy-based-route local

Policy based routing information for local:

Policy name: aaa

node 0 deny:

Matched: 0

node 1 permit:

if-match acl 3999

Matched: 0

node 2 permit:

if-match acl 2000

apply next-hop 2.2.2.2

Matched: 0

node 5 permit:

if-match acl 3101

apply next-hop 1.1.1.1

Matched: 0

Total matched: 0

Table 4 Command output

Field	Description
Policy based routing information for local	Local PBR configuration and statistics.
node 0 deny/node 2 permit	Match mode of the node: permit or deny.
if-match acl	Compares packets with the ACL.
apply next-hop	Specifies a next hop for permitted packets.
Matched: 0	Number of successful matches on the node.
Total matched	Total number of successful matches on all nodes.

Related commands

reset ip policy-based-route statistics

display ip policy-based-route setup

Use display ip policy-based-route setup to display PBR configuration.

Syntax

display ip policy-based-route setup

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# Display PBR configuration.

Policy name Type Interface

aaa Forward GigabitEthernet3/1/1

aaa Forward GigabitEthernet3/1/2

aaa Local N/A

Table 5 Command output

Field	Description
Type	Type of the PBR: · Forward—Interface PBR. · Local—Local PBR.
Interface Name	Interface where the policy is applied.

Field

Description

Type

Type of the PBR:

· Forward—Interface PBR.

· Local—Local PBR.

Interface Name

Interface where the policy is applied.

Related commands

ip policy-based-route

if-match acl

Use if-match acl to set an ACL match criterion.

Use undo if-match acl to restore the default.

Syntax

if-match acl { acl-number | name acl-name }

undo if-match acl

Default

No ACL match criterion is set.

Views

Policy node view

Predefined user roles

network-admin

Parameters

acl-number: Specifies an ACL by its number in the range of 2000 to 2999 for a basic ACL, and in the range of 3000 to 3999 for an advanced ACL.

name acl-name: Specifies an ACL by its name, a case-insensitive string of 1 to 63 characters starting with a letter. The ACL name cannot be all.

Examples

# Configure Node 11 of policy aa to permit the packets matching ACL 2011.

<Sysname> system-view

[Sysname] policy-based-route aa permit node 11

[Sysname-pbr-aa-11] if-match acl 2011

# Configure Node 11 of policy aa to permit the packets matching ACL aaa.

<Sysname> system-view

[Sysname] policy-based-route aa permit node 11

[Sysname-pbr-aa-11] if-match acl name aaa

ip local policy-based-route

Use ip local policy-based-route to specify a policy for local PBR.

Use undo ip local policy-based-route to restore the default.

Syntax

ip local policy-based-route policy-name

undo ip local policy-based-route

Default

No policy is referenced for local PBR.

Views

System view

Predefined user roles

network-admin

Parameters

policy-name: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. The specified policy must already exist.

Usage guidelines

Local PBR guides the forwarding of locally generated packets, such as ICMP packets generated by using the ping command.

Local PBR might affect local services, such as ping and Telnet. When you use local PBR, make sure you fully understand its impact on local services of the device.

You can specify only one policy for local PBR and must make sure the specified policy already exists.

Before you apply a new policy, you must first remove the current policy.

Examples

# Configure local PBR based on policy aaa.

<Sysname> system-view

[Sysname] ip local policy-based-route aaa

Related commands

display ip policy-based-route setup

policy-based-route

ip policy-based-route

Use ip policy-based-route to specify a policy for interface PBR on an interface.

Use undo ip policy-based-route to restore the default.

Syntax

ip policy-based-route policy-name [ share-mode ]

undo ip policy-based-route

Default

No policy is applied to an interface.

Views

Interface view

Predefined user roles

network-admin

Parameters

policy-name: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. The specified policy must already exist.

share-mode: Applies the policy in resource sharing mode. All interfaces applied with the policy on a card use the same hardware resources. If you do not specify this keyword, the interfaces use different hardware resources. On an interface, you can configure only one application in QoS and ACL resource sharing mode for traffic in one direction. The device supports only the packet filtering, QoS policy, and PBR applications. For information about packet filtering and QoS policies, see ACL commands and QoS policy commands in ACL and QoS Command Reference.

Usage guidelines

Typically, each interface on a card uses different hardware resources for a policy. To avoid resource usage overhead, you can specify the resource sharing mode when applying the policy to each interface. The interfaces will use the same hardware resources.

You can specify only one mode for the policy on an interface. Before you change the mode of the policy, you must first remove the current policy from the interface.

The resource sharing mode is supported only on CSPEX (excluding CSPEX-1204 and CSPEX-1104-E) cards.

Examples

# Apply policy aaa to GigabitEthernet 3/1/1.

<Sysname> system-view

[Sysname] interface gigabitethernet 3/1/1

[Sysname-GigabitEthernet3/1/1] ip policy-based-route aaa

Related commands

display ip policy-based-route setup

policy-based-route

ip policy-based-route-log enable

Use ip policy-based-route-log enable to enable the PBR logging feature.

Use undo ip policy-based-route-log enable to disable the PBR logging feature.

Syntax

ip policy-based-route-log enable

undo ip policy-based-route-log enable

Default

The PBR logging feature is disabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

The PBR logging feature helps the administrator locate and fix faults. The feature logs PBR events and sends the logs to the information center. The information center processes the logs according to output rules. For more information about the information center, see Network Management and Monitoring Configuration Guide.

Excessive PBR log messages degrade the performance of the device. To avoid this problem, disable the PBR logging feature.

Examples

# Enable the PBR logging feature.

<Sysname> system-view

[Sysname] ip policy-based-route-log enable

Related commands

apply next-hop

policy-based-route

Use policy-based-route to create a policy node and enter its view, or enter the view of an existing policy node.

Use undo policy-based-route to delete a policy or policy node.

Syntax

policy-based-route policy-name [ deny | permit ] node node-number

undo policy-based-route policy-name [ deny | node node-number | permit ]

Default

No policy nodes exist.

Views

System view

Predefined user roles

network-admin

Parameters

policy-name: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters.

deny: Specifies the match mode for the policy node as deny.

permit: Specifies the match mode for the policy node as permit (default mode).

node node-number: Specifies a policy node by its number. A smaller number has a higher priority. The value range for the node-number argument is 0 to 255.

Usage guidelines

A policy that has been applied to an interface or locally cannot be deleted. To delete it, you must first cancel the application.

· If a policy node is specified, the undo policy-based-route command deletes the specified policy node.

· If a match mode is specified, the command deletes all nodes configured with the match mode.

· If no policy node or match mode is specified, the command deletes the whole policy.

Examples

# Create permit-mode of Node 10 for policy policy1 and enter its view.

<Sysname> system-view

[Sysname] policy-based-route policy1 permit node 10

[Sysname-pbr-policy1-10]

Related commands

display ip policy-based-route

ip policy-based-route-log enable

reset ip policy-based-route statistics

Use reset ip policy-based-route statistics to clear PBR statistics.

Syntax

reset ip policy-based-route statistics [ policy policy-name ]

Views

User view

Predefined user roles

network-admin

Parameters

policy policy-name: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. If you do not specify a policy, this command clears PBR statistics for all policies.

Examples

# Clear all PBR statistics.

<Sysname> reset ip policy-based-route statistics

Related commands

display ip policy-based-route interface

display ip policy-based-route local

07-Layer 3 - IP Routing Command Reference

display ip policy-based-route

display ip policy-based-route interface

ip policy-based-route

ip policy-based-route-log enable

Intelligent Terminal Products

Product Support Services

Technical Service Solutions

Resource Center

Policy

Online Help

Become a Partner

Partner Policy & Program

Global Learning

Partner Sales Resources

Service Business

News & Events

Contact Us