16-PW-STD-MIB
本章节下载: 16-PW-STD-MIB (202.01 KB)
目 录
PW-STD-MIB用来实现PW相关配置的功能。
rfc5601-pw-std.mib
iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).transmission(10).pwStdMIB(246)
节点名称及OID |
最大访问权限 |
数据类型 |
有效范围 |
含义 |
实现规格 |
pwIndexNext (1.3.6.1.2.1.10.246.1.1) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
下一可用索引 |
实现与MIB文件定义一致 |
节点名称及OID |
最大访问权限 |
数据类型 |
有效范围 |
含义 |
实现规格 |
pwPerfTotalErrorPackets (1.3.6.1.2.1.10.246.1.6) |
read-only |
Counter32 |
Counter32 (0..4294967295) |
错误包的总数 |
不支持 |
节点名称及OID |
最大访问权限 |
数据类型 |
有效范围 |
含义 |
实现规格 |
pwUpDownNotifEnable (1.3.6.1.2.1.10.246.1.9) |
read-write |
TruthValue |
true(1), false(2) |
PW up和down通告 |
实现与MIB文件定义一致 |
节点名称及OID |
最大访问权限 |
数据类型 |
有效范围 |
含义 |
实现规格 |
pwDeletedNotifEnable (1.3.6.1.2.1.10.246.1.10) |
read-write |
TruthValue |
true(1), false(2) |
PW删除通告使能 |
实现与MIB文件定义一致 |
节点名称及OID |
最大访问权限 |
数据类型 |
有效范围 |
含义 |
实现规格 |
pwNotifRate (1.3.6.1.2.1.10.246.1.11) |
read-write |
Unsigned32 |
Unsigned32 (1..2147483647) |
对外发送PW通告的最大数量 |
不支持 |
该表用来实现PW配置的功能。
创建约束 |
修改约束 |
删除约束 |
读取约束 |
支持 |
不支持 |
支持 |
支持 |
该表的索引节点是pwIndex。
节点名称及OID |
最大访问权限 |
数据类型 |
有效范围 |
含义 |
实现规格 |
pwIndex (1.3.6.1.2.1.10.246.1.2.1.1) |
not-accessible |
PwIndexType |
Unsigned32 (1..2147483647) |
索引 |
实现与MIB文件定义一致 |
pwType (1.3.6.1.2.1.10.246.1.2.1.2) |
read-create |
IANAPwTypeTC |
other(0), frameRelayDlciMartiniMode(1), atmAal5SduVcc(2), atmTransparent(3), ethernetTagged(4), ethernet(5), hdlc(6), ppp(7), cem(8), atmCellNto1Vcc(9), atmCellNto1Vpc(10), ipLayer2Transport(11), atmCell1to1Vcc(12), atmCell1to1Vpc(13), atmAal5PduVcc(14), frameRelayPortMode(15), cep(16), e1Satop(17), t1Satop(18), e3Satop(19), t3Satop(20), basicCesPsn(21), basicTdmIp(22), tdmCasCesPsn(23), tdmCasTdmIp(24), frDlci(25), wildcard(32767) |
封装类型 |
对于set操作,只支持 ethernetTagged(4)和ethernet(5) |
pwOwner (1.3.6.1.2.1.10.246.1.2.1.3) |
read-create |
INTEGER |
manual(1), pwIdFecSignaling(2), genFecSignaling(3), l2tpControlProtocol(4), other(5) |
PW所有者 |
对于set操作,只支持 manual(1)、pwIdFecSignaling(2)和genFecSignaling(3) |
pwPsnType (1.3.6.1.2.1.10.246.1.2.1.4) |
read-create |
IANAPwPsnTypeTC |
mpls(1), l2tp(2), udpOverIp(3), mplsOverIp(4), mplsOverGre(5), other(6) |
PW的PSN类型 |
只支持读操作 只支持 mpls(1), mplsOverGre (5) 和 other (6) |
pwPeerAddrType (1.3.6.1.2.1.10.246.1.2.1.7) |
read-create |
InetAddressType |
unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) |
PW的邻居IP地址类型 |
只支持ipv4(1) |
pwPeerAddr (1.3.6.1.2.1.10.246.1.2.1.8) |
read-create |
InetAddress |
OCTET STRING (0..255) |
PW的邻居IP地址 |
只支持IPv4地址 |
pwAttachedPwIndex (1.3.6.1.2.1.10.246.1.2.1.9) |
read-create |
PwIndexOrZeroType |
Unsigned32 (0..2147483647) |
下一级PW索引 |
只支持读操作 |
pwIfIndex (1.3.6.1.2.1.10.246.1.2.1.10) |
read-create |
InterfaceIndexOrZero |
Integer32 (0..2147483647) |
PW作为接口时的接口索引 |
只支持读操作 |
pwID (1.3.6.1.2.1.10.246.1.2.1.11) |
read-create |
PwIDType |
Unsigned32 (0..4294967295) |
PW编号 |
实现与MIB文件定义一致 |
pwLocalGroupID (1.3.6.1.2.1.10.246.1.2.1.12) |
read-create |
PwGroupID |
Unsigned32 (0..4294967295) |
PW的本地组ID |
只支持读操作 |
pwGroupAttachmentID (1.3.6.1.2.1.10.246.1.2.1.13) |
read-create |
PwAttachmentIdentifierType |
OCTET STRING (0..255) |
PW的本地AGI |
只支持读操作 |
pwLocalAttachmentID (1.3.6.1.2.1.10.246.1.2.1.14) |
read-create |
PwAttachmentIdentifierType |
OCTET STRING (0..255) |
PW的本地AII |
只支持读操作 |
pwRemoteAttachmentID (1.3.6.1.2.1.10.246.1.2.1.15) |
read-create |
PwAttachmentIdentifierType |
OCTET STRING (0..255) |
PW的远端AII |
只支持读操作 |
pwCwPreference (1.3.6.1.2.1.10.246.1.2.1.16) |
read-create |
TruthValue |
true(1), false(2) |
本地是否配置控制字 |
实现与MIB文件定义一致 |
pwLocalIfMtu (1.3.6.1.2.1.10.246.1.2.1.17) |
read-create |
Unsigned32 |
Unsigned32 (0..65535) |
本地接口MTU |
支持 |
pwLocalCapabAdvert (1.3.6.1.2.1.10.246.1.2.1.19) |
read-create |
IANAPwCapabilities |
pwStatusIndication(0), pwVCCV(1) |
本地PW支持VCCV能力通告 |
对于set操作,必须选择pwStatusIndication(0) |
pwRemoteGroupID (1.3.6.1.2.1.10.246.1.2.1.20) |
read-only |
PwGroupID |
Unsigned32 (0..4294967295) |
PW的远端组IG |
该值始终为0 |
pwCwStatus (1.3.6.1.2.1.10.246.1.2.1.21) |
read-only |
PwCwStatusTC |
waitingForNextMsg(1), sentWrongBitErrorCode(2), rxWithdrawWithWrongBitErrorCode(3), illegalReceivedBit(4), cwPresent(5), cwNotPresent(6), notYetKnown(7) |
PW协商出来的控制字 |
支持cwPresent(5)和cwNotPresent(6) |
pwRemoteIfMtu (1.3.6.1.2.1.10.246.1.2.1.22) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
PW的远端接口MTU |
实现与MIB文件定义一致 |
pwRemoteCapabilities (1.3.6.1.2.1.10.246.1.2.1.24) |
read-only |
IANAPwCapabilities |
pwStatusIndication(0), pwVCCV(1) |
远端PW支持VCCV能力通告 |
实现与MIB文件定义一致 |
pwOutboundLabel (1.3.6.1.2.1.10.246.1.2.1.29) |
read-create |
Unsigned32 |
Unsigned32 (0..4294967295) |
PW的出标签 |
支持 |
pwInboundLabel (1.3.6.1.2.1.10.246.1.2.1.30) |
read-create |
Unsigned32 |
Unsigned32 (0..4294967295) |
PW的入标签 |
支持 |
pwAdminStatus (1.3.6.1.2.1.10.246.1.2.1.36) |
read-create |
INTEGER |
up(1), down(2), testing(3) |
PW的管理状态 |
本节点只支持VPLS的set操作 对于VPLS,set操作被忽略 只支持 up(1) 和 down(2) |
pwOperStatus (1.3.6.1.2.1.10.246.1.2.1.37) |
read-only |
PwOperStatusTC |
up(1), down(2), testing(3), dormant(4), notPresent(5), lowerLayerDown(6) |
PW的操作状态 |
只支持up(1)、down(2)、dormant(4)、notPresent(5)和lowerLayerDown(6) |
pwLocalStatus (1.3.6.1.2.1.10.246.1.2.1.38) |
read-only |
PwStatus |
pwNotForwarding(0), servicePwRxFault(1), servicePwTxFault(2), psnPwRxFault(3), psnPwTxFault(4) |
PW的本地AC状态 |
只支持zero和BITS{pwNotForwarding(0)} |
pwRemoteStatusCapable (1.3.6.1.2.1.10.246.1.2.1.39) |
read-only |
INTEGER |
notApplicable(1), notYetKnown(2), remoteCapable(3), remoteNotCapable(4) |
远端PW状态通告能力 |
实现与MIB文件定义一致 |
pwRemoteStatus (1.3.6.1.2.1.10.246.1.2.1.40) |
read-only |
PwStatus |
pwNotForwarding(0), servicePwRxFault(1), servicePwTxFault(2), psnPwRxFault(3), psnPwTxFault(4) |
PW的远端AC状态 |
实现与MIB文件定义一致 |
pwTimeElapsed (1.3.6.1.2.1.10.246.1.2.1.41) |
read-only |
Integer32 |
Integer32 (0..86399) |
PW的时间消耗 |
实现与MIB文件定义一致 |
pwValidIntervals (1.3.6.1.2.1.10.246.1.2.1.42) |
read-only |
HCPerfValidIntervals |
Integer32 (0..96) |
PW的有效间隔 |
取值范围为0到4 |
pwRowStatus (1.3.6.1.2.1.10.246.1.2.1.43) |
read-create |
RowStatus |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
PW的行状态 |
只支持active(1)、notInService(2)、createAndGo(4)和destroy(6) |
pwStorageType (1.3.6.1.2.1.10.246.1.2.1.44) |
read-create |
StorageType |
other(1), volatile(2), nonVolatile(3), permanent(4), readOnly(5) |
PW的存储类型 |
只支持读操作,该值总是为nonVolatile(3) |
pwOamEnable (1.3.6.1.2.1.10.246.1.2.1.45) |
read-create |
TruthValue |
"true(1), false(2)" |
PW的OAM检测使能标记 |
实现与MIB文件定义一致 |
pwGenAGIType (1.3.6.1.2.1.10.246.1.2.1.46) |
read-create |
PwGenIdType |
Unsigned32 (0..254) |
PW的AGI类型 |
只支持读操作 |
pwGenLocalAIIType (1.3.6.1.2.1.10.246.1.2.1.47) |
read-create |
PwGenIdType |
Unsigned32 (0..254) |
PW的本地AII类型 |
只支持读操作 |
pwGenRemoteAIIType (1.3.6.1.2.1.10.246.1.2.1.48) |
read-create |
PwGenIdType |
Unsigned32 (0..254) |
PW的远端AII类型 |
只支持读操作 |
该表用来实现PW当前时间间隔统计信息的显示功能。
创建约束 |
修改约束 |
删除约束 |
读取约束 |
不支持 |
不支持 |
不支持 |
支持 |
该表的索引节点是pwIndex。
节点名称及OID |
最大访问权限 |
数据类型 |
有效范围 |
含义 |
实现规格 |
pwPerfCurrentInHCPackets (1.3.6.1.2.1.10.246.1.3.1.1) |
read-only |
HCPerfCurrentCount |
Counter64 (0..18446744073709551615) |
PW高位入报文个数统计信息 |
实现与MIB文件定义一致 |
pwPerfCurrentInHCBytes (1.3.6.1.2.1.10.246.1.3.1.2) |
read-only |
HCPerfCurrentCount |
Counter64 (0..18446744073709551615) |
PW高位入报文字节数统计信息 |
实现与MIB文件定义一致 |
pwPerfCurrentOutHCPackets (1.3.6.1.2.1.10.246.1.3.1.3) |
read-only |
HCPerfCurrentCount |
Counter64 (0..18446744073709551615) |
PW高位出报文个数统计信息 |
实现与MIB文件定义一致 |
pwPerfCurrentOutHCBytes (1.3.6.1.2.1.10.246.1.3.1.4) |
read-only |
HCPerfCurrentCount |
Counter64 (0..18446744073709551615) |
PW高位出报文字节数统计信息 |
实现与MIB文件定义一致 |
pwPerfCurrentInPackets (1.3.6.1.2.1.10.246.1.3.1.5) |
read-only |
PerfCurrentCount |
Gauge32 (0..4294967295) |
PW低位入报文个数统计信息 |
实现与MIB文件定义一致 |
pwPerfCurrentInBytes (1.3.6.1.2.1.10.246.1.3.1.6) |
read-only |
PerfCurrentCount |
Gauge32 (0..4294967295) |
PW低位入报文字节数统计信息 |
实现与MIB文件定义一致 |
pwPerfCurrentOutPackets (1.3.6.1.2.1.10.246.1.3.1.7) |
read-only |
PerfCurrentCount |
Gauge32 (0..4294967295) |
PW低位出报文个数统计信息 |
实现与MIB文件定义一致 |
pwPerfCurrentOutBytes (1.3.6.1.2.1.10.246.1.3.1.8) |
read-only |
PerfCurrentCount |
Gauge32 (0..4294967295) |
PW低位出报文字节数统计信息 |
实现与MIB文件定义一致 |
该表用来实现PW最近4个时间间隔统计信息的显示功能。
创建约束 |
修改约束 |
删除约束 |
读取约束 |
不支持 |
不支持 |
不支持 |
支持 |
该表的索引节点是pwIndex和pwPerfIntervalNumber。
节点名称及OID |
最大访问权限 |
数据类型 |
有效范围 |
含义 |
实现规格 |
pwPerfIntervalNumber (1.3.6.1.2.1.10.246.1.4.1.1) |
not-accessible |
Integer32 |
Integer32 (1..96) |
时间间隔的序号值 |
实现与MIB文件定义一致 |
pwPerfIntervalValidData (1.3.6.1.2.1.10.246.1.4.1.2) |
read-only |
TruthValue |
false(2) |
表示该时间间隔信息是否有效 |
实现与MIB文件定义一致 |
pwPerfIntervalTimeElapsed (1.3.6.1.2.1.10.246.1.4.1.3) |
read-only |
HCPerfTimeElapsed |
Integer32 (0..86399) |
该时间间隔经过的时间 |
实现与MIB文件定义一致 |
pwPerfIntervalInHCPackets (1.3.6.1.2.1.10.246.1.4.1.4) |
read-only |
HCPerfIntervalCount |
Counter64 (0..18446744073709551615) |
PW高位入报文个数统计信息 |
实现与MIB文件定义一致 |
pwPerfIntervalInHCBytes (1.3.6.1.2.1.10.246.1.4.1.5) |
read-only |
HCPerfIntervalCount |
Counter64 (0..18446744073709551615) |
PW高位入报文字节数统计信息 |
实现与MIB文件定义一致 |
pwPerfIntervalOutHCPackets (1.3.6.1.2.1.10.246.1.4.1.6) |
read-only |
HCPerfIntervalCount |
Counter64 (0..18446744073709551615) |
PW高位出报文个数统计信息 |
实现与MIB文件定义一致 |
pwPerfIntervalOutHCBytes (1.3.6.1.2.1.10.246.1.4.1.7) |
read-only |
HCPerfIntervalCount |
Counter64 (0..18446744073709551615) |
PW高位出报文字节数统计信息 |
实现与MIB文件定义一致 |
pwPerfIntervalInPackets (1.3.6.1.2.1.10.246.1.4.1.8) |
read-only |
PerfIntervalCount |
Gauge32 (0..4294967295) |
PW低位入报文个数统计信息 |
实现与MIB文件定义一致 |
pwPerfIntervalInBytes (1.3.6.1.2.1.10.246.1.4.1.9) |
read-only |
PerfIntervalCount |
Gauge32 (0..4294967295) |
PW低位入报文字节数统计信息 |
实现与MIB文件定义一致 |
pwPerfIntervalOutPackets (1.3.6.1.2.1.10.246.1.4.1.10) |
read-only |
PerfIntervalCount |
Gauge32 (0..4294967295) |
PW低位出报文个数统计信息 |
实现与MIB文件定义一致 |
pwPerfIntervalOutBytes (1.3.6.1.2.1.10.246.1.4.1.11) |
read-only |
PerfIntervalCount |
Gauge32 (0..4294967295) |
PW低位出报文字节数统计信息 |
实现与MIB文件定义一致 |
该表用来实现PW最近2天时间间隔统计信息的显示功能。
创建约束 |
修改约束 |
删除约束 |
读取约束 |
不支持 |
不支持 |
不支持 |
支持 |
该表的索引节点是pwIndex和pwPerf1DayIntervalNumber。
节点名称及OID |
最大访问权限 |
数据类型 |
有效范围 |
含义 |
实现规格 |
pwPerf1DayIntervalNumber (1.3.6.1.2.1.10.246.1.5.1.1) |
read-only |
Unsigned32 |
Unsigned32 (1..31) |
时间间隔的序号值 |
实现与MIB文件定义一致 |
pwPerf1DayIntervalValidData (1.3.6.1.2.1.10.246.1.5.1.2) |
read-only |
TruthValue |
true(1), false(2) |
表示该时间间隔信息是否有效 |
实现与MIB文件定义一致 |
pwPerf1DayIntervalTimeElapsed (1.3.6.1.2.1.10.246.1.5.1.3) |
read-only |
HCPerfTimeElapsed |
Integer32 (0..86399) |
该时间间隔经过的时间 |
实现与MIB文件定义一致 |
pwPerf1DayIntervalInHCPackets (1.3.6.1.2.1.10.246.1.5.1.4) |
read-only |
Counter64 |
Counter64 (0..18446744073709551615) |
PW高位入报文个数统计信息 |
实现与MIB文件定义一致 |
pwPerf1DayIntervalInHCBytes (1.3.6.1.2.1.10.246.1.5.1.5) |
read-only |
Counter64 |
Counter64 (0..18446744073709551615) |
PW高位入报文字节数统计信息 |
实现与MIB文件定义一致 |
pwPerf1DayIntervalOutHCPackets (1.3.6.1.2.1.10.246.1.5.1.6) |
read-only |
Counter64 |
Counter64 (0..18446744073709551615) |
PW高位出报文个数统计信息 |
实现与MIB文件定义一致 |
pwPerf1DayIntervalOutHCBytes (1.3.6.1.2.1.10.246.1.3.5.7) |
read-only |
Counter64 |
Counter64 (0..18446744073709551615) |
PW高位出报文字节数统计信息 |
实现与MIB文件定义一致 |
该表用来实现PwIndex映射关系的显示功能。
创建约束 |
修改约束 |
删除约束 |
读取约束 |
不支持 |
不支持 |
不支持 |
支持 |
该表的索引节点是pwIndexMappingPwType、pwIndexMappingPwID、pwIndexMappingPeerAddrType和pwIndexMappingPeerAddr。
节点名称及OID |
最大访问权限 |
数据类型 |
有效范围 |
含义 |
实现规格 |
pwIndexMappingPwType (1.3.6.1.2.1.10.246.1.7.1.1) |
not-accessible |
IANAPwTypeTC |
other(0), frameRelayDlciMartiniMode(1), atmAal5SduVcc(2), atmTransparent(3), ethernetTagged(4), ethernet(5), hdlc(6), ppp(7), cem(8), atmCellNto1Vcc(9), atmCellNto1Vpc(10), ipLayer2Transport(11), atmCell1to1Vcc(12), atmCell1to1Vpc(13), atmAal5PduVcc(14), frameRelayPortMode(15), cep(16), e1Satop(17), t1Satop(18), e3Satop(19), t3Satop(20), basicCesPsn(21), basicTdmIp(22), tdmCasCesPsn(23), tdmCasTdmIp(24), frDlci(25), wildcard(32767) |
PW封装类型 |
实现与MIB文件定义一致 |
pwIndexMappingPwID (1.3.6.1.2.1.10.246.1.7.1.2) |
not-accessible |
PwIDType |
Unsigned32 |
PW编号 |
实现与MIB文件定义一致 |
pwIndexMappingPeerAddrType (1.3.6.1.2.1.10.246.1.7.1.3) |
not-accessible |
InetAddressType |
unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) |
PW邻居IP地址类型 |
实现与MIB文件定义一致 |
pwIndexMappingPeerAddr (1.3.6.1.2.1.10.246.1.7.1.4) |
not-accessible |
InetAddress |
OCTET STRING (0..255) |
PW邻居IP地址 |
实现与MIB文件定义一致 |
pwIndexMappingPwIndex (1.3.6.1.2.1.10.246.1.7.1.5) |
read-only |
PwIndexType |
Unsigned32 (1..2147483647) |
PW索引 |
实现与MIB文件定义一致 |
该表用来实现PW关键参数和PwIndex映射关系的显示功能。
创建约束 |
修改约束 |
删除约束 |
读取约束 |
不支持 |
不支持 |
不支持 |
支持 |
该表的索引节点是pwPeerMappingPeerAddrType、pwPeerMappingPeerAddr、pwPeerMappingPwType和pwPeerMappingPwID。
节点名称及OID |
最大访问权限 |
数据类型 |
有效范围 |
含义 |
实现规格 |
pwPeerMappingPeerAddrType (1.3.6.1.2.1.10.246.1.8.1.1) |
not-accessible |
InetAddressType |
unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16) |
PW邻居IP地址类型 |
实现与MIB文件定义一致 |
pwPeerMappingPeerAddr (1.3.6.1.2.1.10.246.1.8.1.2) |
not-accessible |
InetAddress |
OCTET STRING (0..255) |
PW邻居IP地址 |
实现与MIB文件定义一致 |
pwPeerMappingPwType (1.3.6.1.2.1.10.246.1.8.1.3) |
not-accessible |
IANAPwTypeTC |
other(0), frameRelayDlciMartiniMode(1), atmAal5SduVcc(2), atmTransparent(3), ethernetTagged(4), ethernet(5), hdlc(6), ppp(7), cem(8), atmCellNto1Vcc(9), atmCellNto1Vpc(10), ipLayer2Transport(11), atmCell1to1Vcc(12), atmCell1to1Vpc(13), atmAal5PduVcc(14), frameRelayPortMode(15), cep(16), e1Satop(17), t1Satop(18), e3Satop(19), t3Satop(20), basicCesPsn(21), basicTdmIp(22), tdmCasCesPsn(23), tdmCasTdmIp(24), frDlci(25), wildcard(32767) |
PW封装类型 |
实现与MIB文件定义一致 |
pwPeerMappingPwID (1.3.6.1.2.1.10.246.1.8.1.4) |
not-accessible |
PwIDType |
Unsigned32(0..4294967295) |
PW编号 |
实现与MIB文件定义一致 |
pwPeerMappingPwIndex (1.3.6.1.2.1.10.246.1.8.1.5) |
read-only |
PwIndexType |
Unsigned32 (1..2147483647) |
PW索引 |
实现与MIB文件定义一致 |
该表用来实现GenFec类型的PW关键参数和PwIndex映射关系的显示功能。
创建约束 |
修改约束 |
删除约束 |
读取约束 |
不支持 |
不支持 |
不支持 |
支持 |
该表的索引节点是pwGenFecIndexMappingAGIType、pwGenFecIndexMappingAGI、pwGenFecIndexMappingLocalAIIType、pwGenFecIndexMappingLocalAII、pwGenFecIndexMappingRemoteAIIType和pwGenFecIndexMappingRemoteAII。
节点名称及OID |
最大访问权限 |
数据类型 |
有效范围 |
含义 |
实现规格 |
pwGenFecIndexMappingAGIType (1.3.6.1.2.1.10.246.1.12.1.1) |
not-accessible |
PwGenIdType |
Unsigned32 (0..254) |
PW的AGI类型 |
实现与MIB文件定义一致 |
pwGenFecIndexMappingAGI (1.3.6.1.2.1.10.246.1.12.1.2) |
not-accessible |
PwAttachmentIdentifierType |
OCTET STRING (0..255) |
PW的AGI取值 |
实现与MIB文件定义一致 |
pwGenFecIndexMappingLocalAIIType (1.3.6.1.2.1.10.246.1.12.1.3) |
not-accessible |
PwGenIdType |
Unsigned32 (0..254) |
PW的本地AGI类型 |
实现与MIB文件定义一致 |
pwGenFecIndexMappingLocalAII (1.3.6.1.2.1.10.246.1.12.1.4) |
not-accessible |
PwAttachmentIdentifierType |
OCTET STRING (0..255) |
PW的本地AGI取值 |
实现与MIB文件定义一致 |
pwGenFecIndexMappingRemoteAIIType (1.3.6.1.2.1.10.246.1.12.1.5) |
not-accessible |
PwGenIdType |
Unsigned32 (0..254) |
PW的对端AGI类型 |
实现与MIB文件定义一致 |
pwGenFecIndexMappingRemoteAII (1.3.6.1.2.1.10.246.1.12.1.6) |
not-accessible |
PwAttachmentIdentifierType |
OCTET STRING (0..255) |
PW的对端AGI取值 |
实现与MIB文件定义一致 |
pwGenFecIndexMappingPwIndex (1.3.6.1.2.1.10.246.1.12.1.7) |
read-only |
PwIndexType |
Unsigned32 (1..2147483647) |
PW索引 |
实现与MIB文件定义一致 |
【属性】
OID |
告警标题 |
类型 |
级别 |
清除告警 |
缺省状态 |
1.3.6.1.2.1.10.246.0.1 |
PW状态down告警 |
故障告警 |
重要 |
1.3.6.1.2.1.10.246.0.2 (pwUp) |
关闭 |
【描述】
当一个或多个连续pwTable表项的 pwOperStatus对象将由其他状态(notPresent(5)除外)转换为down(2)或lowerLayerDown(6)状态时,系统生成该告警。
【状态控制】
命令行:snmp-agent trap enable l2vpn pw-up-down
命令行:undo snmp-agent trap enable l2vpn pw-up-down
【绑定变量】
OID(变量名) |
含义 |
是否索引 |
类型 |
取值范围 |
1.3.6.1.2.1.10.246.1.2.1.38 (pwOperStatus) |
PW操作状态 |
否 |
PwOperStatusTC |
up(1) down(2) testing(3) dormant(4) notPresent(5) lowerLayerDown(6) |
1.3.6.1.2.1.10.246.1.2.1.38 (pwOperStatus) |
PW操作状态 |
否 |
PwOperStatusTC |
up(1) down(2) testing(3) dormant(4) notPresent(5) lowerLayerDown(6) |
本表未绑定索引节点,请参考绑定变量节点定义。
【处理建议】
无需处理。
【属性】
OID |
告警标题 |
类型 |
级别 |
清除告警 |
缺省状态 |
1.3.6.1.2.1.10.246.0.2 |
PW状态up告警 |
恢复告警 |
- |
- |
关闭 |
【描述】
当一个或多个连续pwTable表项的pwOperStatus对象将由其他状态(notPresent(5)除外)转换为up(1)状态,且pwDown告警已下发时,系统生成该告警。
【状态控制】
命令行:snmp-agent trap enable l2vpn pw-up-down
命令行:undo snmp-agent trap enable l2vpn pw-up-down
【绑定变量】
OID(变量名) |
含义 |
是否索引 |
类型 |
取值范围 |
1.3.6.1.2.1.10.246.1.2.1.38 (pwOperStatus) |
PW操作状态 |
否 |
PwOperStatusTC |
up(1) down(2) testing(3) dormant(4) notPresent(5) lowerLayerDown(6) |
1.3.6.1.2.1.10.246.1.2.1.38 (pwOperStatus) |
PW操作状态 |
否 |
PwOperStatusTC |
up(1) down(2) testing(3) dormant(4) notPresent(5) lowerLayerDown(6) |
本表未绑定索引节点,请参考绑定变量节点定义。
【处理建议】
无需处理。
【属性】
OID |
告警标题 |
类型 |
级别 |
清除告警 |
缺省状态 |
1.3.6.1.2.1.10.246.0.3 |
PW删除告警 |
故障告警 |
重要 |
- |
关闭 |
【描述】
当PW被删除时,系统生成该告警。
【状态控制】
命令行:snmp-agent trap enable l2vpn pw-delete
命令行:undo snmp-agent trap enable l2vpn pw-delete
【绑定变量】
OID(变量名) |
含义 |
是否索引 |
类型 |
取值范围 |
1.3.6.1.2.1.10.246.1.2.1.2 (pwType) |
PW数据封装类型 |
否 |
IANAPwTypeTC |
other(0) frameRelayDlciMartiniMode(1) atmAal5SduVcc(2) atmTransparent(3) ethernetTagged(4) ethernet(5) hdlc(6) ppp(7) cem(8) -- Historic type atmCellNto1Vcc(9) atmCellNto1Vpc(10) ipLayer2Transport(11) atmCell1to1Vcc(12) atmCell1to1Vpc(13) atmAal5PduVcc(14) frameRelayPortMode(15) cep(16), e1Satop(17) t1Satop(18) e3Satop(19) t3Satop(20) basicCesPsn(21) basicTdmIp(22) tdmCasCesPsn(23) tdmCasTdmIp(24) frDlci(25) wildcard (32767) |
1.3.6.1.2.1.10.246.1.2.1.12 (pwID) |
PW标识 |
否 |
PwIDType |
Unsigned32(1..4294967295) |
1.3.6.1.2.1.10.246.1.2.1.8 (pwPeerAddrType) |
PW远端PE的地址类型 |
否 |
InetAddressType |
unknown(0) ipv4(1) ipv6(2) ipv4z(3) ipv6z(4) dns(16) |
1.3.6.1.2.1.10.246.1.2.1.9 (pwPeerAddr) |
PW远端PE的地址 |
否 |
InetAddress |
OCTET STRING (SIZE (0..255)) |
本表未绑定索引节点,请参考绑定变量节点定义。
【处理建议】
无需处理。
不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!