Login
- Table of Contents
-
- 07-System
- 01-High availability group
- 02-VRRP
- 03-Track
- 04-BFD
- 05-NQA
- 06-Basic log settings
- 07-Session log settings
- 08-NAT log settings
- 09-AFT log settings
- 10-Threat log settings
- 11-Application audit log settings
- 12-NetShare log settings
- 13-URL filtering log settings
- 14-Attack defense log settings
- 15-Bandwidth alarm logs
- 16-Configuration log settings
- 17-Security policy log
- 18-Heartbeat log settings
- 19-IP access logs
- 20-WAF log settings
- 21-Bandwidth management logs
- 22-Context rate limit logging
- 23-Report settings
- 24--Session settings
- 25-MAC authentication online users
- 26-Signature upgrade
- 27-Software upgrade
- 28-License management
- 29-IRF
- 30-IRF advanced settings
- 31-Contexts
- 32-Administrators
- 33-Date and time
- 34-MAC address learning through a Layer 3 device
- 35-SNMP
- 36-Configuration management
- 37-About
- 38-Reboot
- 39-Ping
- 40-Tracert
- 41-Packet capture
- 42-Webpage Diagnosis
- 43-Diagnostic Info
- 44-Packet trace
- 45-Load balancing test
- 46-IPsec diagnosis
- 47-Fast Internet Access
- 48-IP reputation log settings
- 49-Load balancing logging
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 23-Report settings | 27.30 KB |
Report settings
This help contains the following topics:
· Configure report subscription
Introduction
After you add a subscriber for a report, the report will be sent to the subscriber through email.
For the subscribers to receive the report, you must configure the email server.
The device sends the daily report during the least busy hours (1 a.m. to 5 a.m.). The monthly report of the previous month is sent on the first day of each month.
The report subscription feature supports the following types of reports:
· Summary report—Displays summarized service statistics collected over a time range.
· Comparison report—Provides comparison of service statistics collected over two time ranges that contain the same number of days.
· Intelligent report—Provides intelligent analysis of users' work efficiency, data leakage, and turnover risks based on their network access behaviors.
· Comprehensive report—Illustrates the overall device operational and network security status based on analysis of critical service statistics.
Configure report subscription
Configure report subscription as shown in Figure 1.
Figure 1 Report subscription configuration procedure
Procedure
1. Click the System tab.
2. In the navigation pane, select Report Settings > Email Server.
3. Configure the email server.
Table 1 Email server configuration items
|
Item |
Description |
|
Email server address |
Enter the IP address or host name of the email server. |
|
Sender address |
Enter the email sender address. |
|
DNS server IP |
Enter the IP address of the DNS server. |
|
Identity authentication |
Select Enable to enable email client authentication. Enable email client authentication as required by the email server. |
|
Secure user credential transmission |
Select Enable to enable secure transmission of user authentication credentials. |
|
Username |
Enter the username for connecting to the email server. |
|
Password |
Enter the password for connecting to the email server. |
4. Click Apply.
5. Add a subscriber for a report:
a. Go to the Report Settings > Report Subscription page.
b. Click Add for a report.
c. Enter the email address of the report subscriber.
d. Click OK.
