Login
- Table of Contents
-
- 07-System
- 01-High availability group
- 02-VRRP
- 03-Track
- 04-BFD
- 05-NQA
- 06-Basic log settings
- 07-Session log settings
- 08-NAT log settings
- 09-AFT log settings
- 10-Threat log settings
- 11-Application audit log settings
- 12-NetShare log settings
- 13-URL filtering log settings
- 14-Attack defense log settings
- 15-Bandwidth alarm logs
- 16-Configuration log settings
- 17-Security policy log
- 18-Heartbeat log settings
- 19-IP access logs
- 20-WAF log settings
- 21-Bandwidth management logs
- 22-Context rate limit logging
- 23-Report settings
- 24--Session settings
- 25-MAC authentication online users
- 26-Signature upgrade
- 27-Software upgrade
- 28-License management
- 29-IRF
- 30-IRF advanced settings
- 31-Contexts
- 32-Administrators
- 33-Date and time
- 34-MAC address learning through a Layer 3 device
- 35-SNMP
- 36-Configuration management
- 37-About
- 38-Reboot
- 39-Ping
- 40-Tracert
- 41-Packet capture
- 42-Webpage Diagnosis
- 43-Diagnostic Info
- 44-Packet trace
- 45-Load balancing test
- 46-IPsec diagnosis
- 47-Fast Internet Access
- 48-IP reputation log settings
- 49-Load balancing logging
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 10-Threat log settings | 25.79 KB |
Threat log settings
This help contains the following topics:
Introduction
Threat logs record detected network attack behaviors. Threat logs can be classified into IPS logs and anti-virus logs.
IPS log settings
IPS logs can be output as system logs to the information center, as fast logs to designated log hosts, or be output to designated email recipients through email.
IPS logs can be output as fast logs in either of the following formats:
· Standard.
· SGCC.
Only IPS alarm logs and signature update logs can be output in SGCC format. You can set the daily log output time for signature update logs in SGCC format.
Support for the SGCC format depends on the device model.
Anti-virus log settings
Anti-virus logs can be output as system logs to the information center or be output through email.
Restrictions and guidelines
IPS logs can be output in Chinese. If you select Chinese for outputting IPS logs, the attack name, attack category, and attack subcategory fields of an IPS log message are displayed in Chinese.
