- 产品与解决方案
- 行业解决方案
- 服务
- 支持
- 合作伙伴
- 新华三人才研学中心
- 关于我们
02-FAT模式切换为FIT模式操作指导
本章节下载： 02-FAT模式切换为FIT模式操作指导 (242.02 KB)
FAT模式切换为FIT模式操作指导
Copyright © 2021 新华三技术有限公司 版权所有，保留一切权利。
非经本公司书面许可，任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部，并不得以任何形式传播。
除新华三技术有限公司的商标外，本手册中出现的其它公司的商标、产品标识及商品名称，由各自权利人拥有。
本文档中的信息可能变动，恕不另行通知。
AP的工作模式由FAT模式切换为FIT模式时，配置文件会被清空，请备份当前版本FAT AP的配置文件。
图1-1 AP的工作模式切换示意图（FAT切FIT）
AP设备上电和重新启动的过程中，在配置终端的屏幕上首先将显示：
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing.................................
...Done.
****************************************************************************
* *
* H3C WA5530 BootWare, Version 7.09 *
* *
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date : Jun 23 2017
CPU Type : ARM
CPU L1 Cache : 32KB
CPU L2 Cache : 256KB
CPU Clock Speed : 710MHz
Memory Type : DDR3 SDRAM
Memory Size : 512MB
Memory Speed : 667MHz
Flash Size : 128MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
当出现“Press Ctrl+B to access EXTENDED-BOOTWARE MENU...”时，键入<Ctrl+B>，系统进入BootWare主菜单：
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9):
该菜单含义如下：
|
菜单项 |
说明 |
|
<1> Boot System |
引导启动文件 |
|
<2> Enter Serial SubMenu |
进入串口子菜单 |
|
<3> Enter Ethernet SubMenu |
进入以太网子菜单 |
|
<4> File Control |
文件控制子菜单 |
|
<5> Restore to Factory Default Configuration |
恢复设备的出厂配置 |
|
<6> Skip Current System Configuration |
跳过当前配置进行启动，只是本次生效。该功能一般在用户丢失口令之后使用 |
|
<7> BootWare Operation Menu |
BootWare操作子菜单 BootWare程序会随设备启动文件的升级而同步升级，不推荐用户单独升级BootWare程序 |
|
<8> Skip Authentication for Console Login |
清除Console口登录密码 |
|
<9> Storage Device Operation |
存储设备控制菜单，用于存储设备的选择 |
|
<0> Reboot |
重新启动设备 |
|
Ctrl+Z: Access EXTENDED ASSISTANT MENU |
进入BootWare扩展菜单 |
|
Ctrl+F: Format File System |
格式化文件系统 |
|
Ctrl+C: Display Copyright |
显示版权信息 |
|
Ctrl+Y: Change AP Mode |
切换AP模式 |
在BootWare主菜单下键入<Ctrl+F>，并输入“Y”格式化存储介质：
Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y.....
............................................................................
..................
Format success.
在BootWare主菜单下键入<Ctrl+Y>，可以进入AP模式切换菜单，系统显示如下：
Please select the new mode
Current mode is Fat
============================================================================
|NO. Mode |
|1 Fat Mode |
|2 Fit Mode |
|0 Exit |
============================================================================
Enter your choice(0-2):
在AP模式切换菜单下键入<2>，将会切换AP的工作模式为FIT模式。
Enter your choice(0-2):2
Changed to fit mode successfully!
切换成功后，需要加载FIT AP版本启动，请通过BootWare菜单或者AC下载版本，详细操作请参见1.2 通过BootWare菜单方式升级设备或者1.3 通过AC直接下载FIT AP版本进行自动升级。
1. 进入BootWare主菜单
AP设备上电和重新启动的过程中，在配置终端的屏幕上首先将显示：
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing.................................
...Done.
****************************************************************************
* *
* H3C WA5530 BootWare, Version 7.09 *
* *
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date : Jun 23 2017
CPU Type : ARM
CPU L1 Cache : 32KB
CPU L2 Cache : 256KB
CPU Clock Speed : 710MHz
Memory Type : DDR3 SDRAM
Memory Size : 512MB
Memory Speed : 667MHz
Flash Size : 128MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
当出现“Press Ctrl+B to access EXTENDED-BOOTWARE MENU...”时，键入<Ctrl+B>，系统进入BootWare主菜单：
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9):
2. 进入以太网口子菜单
在BootWare主菜单下键入<3>，可以进入以太网口子菜单，系统显示如下：
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5):
以太网口子菜单中各选项解释如下：
表1-2 以太网口子菜单
|
菜单项 |
说明 |
|
|
<1> Download Image Program To SDRAM And Run |
下载启动文件到内存并启动 |
|
|
<2> Update Main Image File |
升级主启动文件 |
|
|
<3> Update Backup Image File |
升级备份启动文件 |
|
|
<4> Download Files(*.*) |
下载启动文件到存储 |
|
|
<5> Modify Ethernet Parameter |
修改以太网口参数 |
|
|
<0> Exit To Main Menu |
返回BootWare主菜单 |
|
3. 修改以太网口参数
在以太网口子菜单下键入<5>，可以修改以太口参数，系统显示如下：
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :wa5300.ipe
:
Target File Name :wa5300.ipe
:
Server IP Address :192.168.0.2
Local IP Address :192.168.0.50
Subnet Mask :0.0.0.0
Gateway IP Address :0.0.0.0
表1-3 以太网参数设置说明
|
显示 |
说明 |
|
'.' = Clear field |
快捷键：“.”表示清除当前输入 |
|
'-' = Go to previous field |
快捷键：“-”表示返回到前一个参数域 |
|
Ctrl+D = Quit |
快捷键：表示退出参数配置界面 |
|
Protocol (FTP or TFTP) |
使用的传输协议，可以为FTP或者TFTP |
|
Load File Name |
下载文件名，要与下载的实际文件名一致 |
|
Target File Name |
存储的目标文件名。缺省情况下与服务器端文件名一致 |
|
Server IP Address |
TFTP/FTP服务器的IP地址 |
|
Local IP Address |
本地IP地址，为TFTP/FTP客户端设置的IP地址 |
|
Subnet Mask |
本地IP地址的子网掩码 |
|
Gateway IP Address |
网关IP地址。当与服务器不在同一网段时需要配置网关地址。 |
|
FTP User Name |
FTP用户名，传输协议为TFTP时，无此选项 |
|
FTP User Password |
FTP用户密码，传输协议为TFTP时，无此选项 |
4. 进行版本下载
以升级主启动文件为例，键入<2>升级主启动文件：
Loading.....................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
.......................................................Done.
37386240 bytes downloaded!
Image file wa5300-boot.bin is self-decompressing...
Saving file flash:/wa5300-boot.bin ................Done.
Image file wa5300-system.bin is self-decompressing...
Saving file flash:/wa5300-system.bin ...................................
........................................................Done.
选择<0>，返回BootWare主菜单：
Enter your choice(0-5): 0
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9):
选择<1>，引导系统：
Enter your choice(0-9): 1
Loading the main image files...
Loading file flash:/wa5300-system.bin.................................
Done.
Loading file flash:/wa5300-boot.bin........Done.
Image file flash:/wa5300-boot.bin is self-decompressing.................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
......................Done.
System image is starting...
Startup configuration file doesn't exist or is invalid.
Line con0 is available.
Press ENTER to get started.
图1-2 通过AC下载FIT AP版本的升级环境
(1) 在AC上配置对应型号的AP的模板，并开启版本升级功能
# 创建ap10，型号为WA5530。
<Sysname> system-view
[Sysname] wlan ap ap10 model WA5530
# 配置AP的序列号。
[Sysname-wlan-ap-ap10] serial-id 219801A0YF916CG02501
# 开启AP版本升级功能。
[Sysname-wlan-ap-ap10] firmware-upgrade enable
[Sysname-wlan-ap-ap10] quit
(2) AC上启动DHCP服务
# 开启DHCP服务。
[Sysname] dhcp enable
# 创建DHCP地址池并进入DHCP地址池视图。
[Sysname] dhcp server ip-pool dhcp1601
# 配置DHCP地址池动态分配的IP地址网段。
[Sysname-dhcp-pool-dhcp1601] network 192.168.0.0 mask 255.255.255.0
[Sysname-dhcp-pool-dhcp1601] gateway-list 192.168.0.1
[Sysname-dhcp-pool-dhcp1601] quit
# 完成上述配置后，AP会自动下载版本，在AC上通过display wlan ap name ap10命令可以查看AP的状态为正在下载版本。
<Sysname> display wlan ap name ap10
AP information
State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad
C = Config, DC = DataCheck, R = Run, M = Master, B = Backup
AP name APID State Model Serial ID
ap10 3 IL WA5530 219801A0YF916CG02501
# AP版本下载完毕后，在AC上通过display wlan ap name ap10命令可以查看AP已经在AC上线。
<Sysname> display wlan ap name ap10
AP information
State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad
C = Config, DC = DataCheck, R = Run, M = Master, B = Backup
AP name APID State Model Serial ID
ap10 3 R/M WA5530 219801A0YF916CG02501
不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!
支持
售前咨询
售后咨询
人工在线咨询
